Asbestos Development With Upvc Materials In The Industrial Sector

Pengembangan Asbes Dengan Bahan uPVC Di Bidang Industri

Authors

  • Gilang Januar Andrian Program Studi Teknik Mesin, Fakultas Sains dan Teknologi, Universitas Muhammadiyah Sidoarjo1
  • Edi Widodo Program Studi Teknik Mesin, Fakultas Sains dan Teknologi, Universitas Muhammadiyah Sidoarjo1

DOI:

https://doi.org/10.21070/vwxfs857

Keywords:

Automatic cutting, Upvc cutting, Manufacturing process, Asbestos substitute, Extrusion

Abstract

General Background: Sustainable construction materials require alternatives to traditional hazardous elements to protect human health and environmental integrity. Specific Background: Unplasticized Polyvinyl Chloride (uPVC) serves as a durable, corrosion-resistant polymer used in modern manufacturing to produce safer asbestos alternatives. Knowledge Gap: Existing industrial literature rarely details the precise integration of raw material mixing, high-temperature extrusion, and automatic cutting machinery for uPVC asbestos production. Aims: This study discusses the manufacturing process of uPVC asbestos utilizing automated cutting machinery to improve production efficiency, minimize material waste, and increase size precision. Results: Implementing automated cutting systems alongside high-temperature extrusion and water-chilling cooling stages successfully accelerates production cycles and enhances the physical quality of uPVC panels. Novelty: This research provides an empirical overview of the industrial uPVC asbestos production workflow, tracing raw material compaction through calcium carbonate compounding up to automated cutting. Implications: Utilizing automated manufacturing processes for uPVC asbestos significantly boosts output quantity while eliminating the health hazards associated with conventional asbestos fibers.

2884 - Pengembangan+Asbes+Dengan+Bahan+uPVC+_Gilang++Januar.docx+ 4

Key Findings Highlights

  1. High-temperature extrusion processes transform compounded uPVC raw materials into durable building profiles.

    2884 - Pengembangan+Asbes+Dengan+Bahan+uPVC+_Gilang++Januar.docx

  2. Water chiller cooling systems effectively prevent thermal deformation and preserve structural integrity prior to finishing.

    2884 - Pengembangan+Asbes+Dengan+Bahan+uPVC+_Gilang++Januar.docx

  3. Automated cutting mechanisms enhance product precision and streamline manufacturing efficiency for commercial distribution.

    2884 - Pengembangan+Asbes+Dengan+Bahan+uPVC+_Gilang++Januar.docx

Keywords Automatic cutting, Upvc cutting, Manufacturing process, Asbestos substitute, Extrusion

References

M. T. Thamrin, D. Mukhlis, A. Puslitbang, K. Radiasi, and B. Nuklir-Batan, “Dampak Radiologis Pelepasan Serat Asbes,” Pusat Teknologi Keselamatan dan Metrologi Radiasi, 2021.

N. Eskandari, S. Motahari, Z. Atoufi, G. Hashemi Motlagh, and M. Najafi, “Thermal, mechanical, and acoustic properties of silica-aerogel/UPVC composites,” J. Appl. Polym. Sci., vol. 134, no. 14, Apr. 2017. doi: 10.1002/app.44685.

E. K. Petrović and L. K. Hamer, “Improving the healthiness of sustainable construction: Example of polyvinyl chloride (PVC),” Buildings, vol. 8, no. 2, Feb. 2018. doi: 10.3390/buildings8020028.

Strauss and J. Corbin, Penelitian Kualitatif, Yogyakarta: Pustaka Pelajar, 2003.

J. R. Aguiar Pinto, N. B. Sanches, R. da S. Santos, J. I. S. Paio De Oliveira, and R. de C. Lazzarini Dutra, “Development of Asbestos-free and Environment-Friendly Thermal Protection for Aerospace Application,” Materials Research, vol. 21, no. 6, 2018. doi: 10.1590/1980-5373-MR-2017-0856.

F. Silvianti, D. Jayanti, and W. B. Dewi, “Karakterisasi Material Produk Plastik Daur Ulang Berbahan Dasar Polyvinyl Chloride (PVC),” Jurnal Rekayasa Material, 2018.

N. K. Gathimba, “Performance of UPVC Pipe Confined Concrete Columns in Compression,” Master's thesis, 2015.

K. S. Carlos, L. S. de Jager, and T. H. Begley, “Investigation of the primary plasticisers present in polyvinyl chloride (PVC) products currently authorised as food contact materials,” Food Addit. Contam. Part A Chem. Anal. Control Expo. Risk Assess., vol. 35, no. 6, pp. 1214–1222, Jun. 2018. doi: 10.1080/19440049.2018.1447695.

Dumaris, Karakterisasi Larutan Suspending Agent (SA) yang Digunakan untuk Produksi PVC, Program Studi Kimia, Fakultas Sains dan Teknologi, 2021.

E. Widodo, Buku Ajar Mekanika Komposit dan Bio-Komposit, Sidoarjo: UMSIDA Press, 2020.

N. Dwi, A. Asmoro, and W. Widiasih, “Analisis Keandalan Mesin untuk Meningkatkan Kinerja pada Mesin Extruder di PT. Rapindo Plastama,” Jurnal Teknik Industri, vol. 11, no. 2, pp. 45–52, 2022.

H. Surijanto, M. Margianto, and U. Lesmanah, “Implementasi Metode PDCA Seven Step untuk Menekan Frekuensi Gangguan Missalignment pada Mesin Cooler Tuban-2 di PT. Semen Indonesia (Persero) Tbk,” Jurnal Teknik Mesin, vol. 6, no. 1, pp. 12–20, 2017.

P. R. Utama and B. Santoso, “Analisis Kegagalan Proses Produksi Plastik pada Mesin Cutting di PT. PKF dengan Pendekatan Failure Mode and Effect Analysis dan Diagram Pareto,” Jurnal Manajemen Industri, vol. 9, no. 2, pp. 110–118, 2023.

R. A. Pratama and M. Hidayat, “Optimasi Parameter Ekstrusi pada Pembuatan Profil uPVC untuk Aplikasi Bangunan,” Jurnal Rekayasa Mesin, vol. 14, no. 3, pp. 601–610, 2023. doi: 10.21776/jrm.2023.14.3.15.

T. W. Nugroho and D. Prasetyo, “Pengembangan Teknologi Otomasi Pemotongan Material pada Industri Profil Plastik,” Jurnal Otomasi dan Manufaktur, vol. 8, no. 1, pp. 25–33, 2022.

Downloads

Published

2026-10-31

Issue

Vol. 10 No. 1 (2026): Proceedings of the 9th Seminar Nasional Sains 2026

Section

Mechanical Engineering

Categories

License

Copyright (c) 2026 Gilang Januar Andrian, Edi Widodo

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
“Asbestos Development With Upvc Materials In The Industrial Sector: Pengembangan Asbes Dengan Bahan uPVC Di Bidang Industri ”, PELS, vol. 10, no. 1, pp. 1253–1259, Oct. 2026, doi: 10.21070/vwxfs857.

Most read articles by the same author(s)

1 2 > >>