Spongebob Modular Chair Factory Layout
Layout Pabrik Kursi Modular Spongebob
DOI:
https://doi.org/10.21070/9xtxvx59Keywords:
Facility layout planning, , Material handling, Arc, Blocplan, Modular furnitureAbstract
General Background: Facility layout planning represents a vital operational element that directly determines manufacturing efficiency and resource utilization within industrial systems. Specific Background: This study analyzes the application of facility layout planning in the production process of the Spongebob Modular Chair to optimize material flow and reduce material handling costs. Knowledge Gap: Inefficient departmental arrangements frequently cause excessive material handling movement and extended production times that hinder overall operational performance. Aims: This research aims to identify inter-departmental relationships through Activity Relationship Chart and Activity Relationship Diagram, analyze material flow using From-To Chart, and develop layouts with BlocPlan software. Results: The quantitative evaluation reveals a total handling distance of 42.92 meters and total handling costs of Rp2,827,824, with the optimal layout achieving an Adjusted Score of 0.81. Novelty: This work integrates qualitative relationship charts with algorithmic BlocPlan spatial modeling to redesign modular furniture manufacturing facilities. Implications: The proposed layout smooths production flow, minimizes unnecessary movements, and enhances operational efficiency and flexibility.
Key Findings Highlights
-
The integration of Activity Relationship Chart and From-To Chart successfully identifies system inefficiencies and department proximity requirements.
-
BlocPlan software evaluates alternative configurations, selecting an optimal layout with an Adjusted Score of 0.81.
-
The proposed facility layout successfully achieves a total handling distance of 42.92 meters and reduces overall production waste.
Keywords Facility layout planning, Material handling, Arc, Blocplan, Modular furniture
References
• Diah Prasmestari, Naila Adinda Utami, and Mário Marques Fernandes, “Desain Ulang Kursi Mahasiswa Di Kelas Ergonomi Teknik Industri Universitas X.”
• M. Renojati, D. H. Pamungkas, and A. Purnomo, “Proses Pembuatan Produk Kursi Santai Single Seat Minimalis Menggunakan Metode QFD,” 2023.
• J. W. Lamting Wijaya, “Modern Minimalist Style Lounge Chair Design Based on,” Journal of Scientech Research and Development, vol. 7, no. 1, pp. 1293–1302, 2025.
• Karisma and Y. A. Fatimah, “Literature Review: Teknik Perancangan Tata Letak Fasilitas Gudang Pada Perusahaan Manufaktur Yang Efisien,” Borobudur Engineering Review, vol. 2, no. 1, pp. 12–22, 2022.
• Tata, F. N. Aziz, Y. Kurnia, J. R. E. Martadinata, and N. Ciamis, “Dengan Metode ARC Guna Memaksimalkan Proses Produksi Pada Pembuatan Alas Karet Sandal (CV. Nugraha Rubber Ampera),” pp. 45–54, 2023.
• D. A. N. Aplikasinya, Perancangan Tata Letak Fasilitas dan Aplikasinya.
• M. M. Arifin, M. Agustin, D. Elok, and V. Lusia, “Perancangan Tata Letak Fasilitas Menggunakan Metode Systematic Layout Planning Pada Produksi Komponen Wiring Harness,” Jurnal Rekayasa Sistem dan Industri, vol. 19, no. 2, pp. 185–199, 2025.
• P. Tata, L. Produksi, and T. Efisiensi, “Perancangan Tata Letak Fasilitas Produksi untuk Meningkatkan Efisiensi,” Jurnal Ekonomi dan Bisnis Dharma Andalas, vol. 24, no. 1, pp. 227–241, 2022.
• B. Febriyanto and W. Setiafindari, “Optimasi Tata Letak Fasilitas Produksi dengan Metode Systematic Layout Planning (SLP) untuk Meningkatkan Efisiensi Material Handling,” Jurnal Rekayasa Industri, vol. 4, no. 1, pp. 10–19, 2025.
• M. F. Noer et al., “Perancangan Ulang Tata Letak Fasilitas Produksi Stainless Steel Menggunakan Metode SLP dan CRAFT,” Journal of Industrial Engineering, vol. 9, no. 1, pp. 124–132, 2024.
• S. Nurhania and D. Hendarto, “Redesain Tata Letak Fasilitas Proses Produksi Pangan,” Jurnal Teknologi dan Manajemen Industri, vol. 3, pp. 12956–12963, 2024.
• O. S. Saragih, “Optimasi Biaya Distribusi Beras di Perum Bulog Kantor Bulog Cabang Pematangsiantar Menggunakan Metode Transportasi,” J. Pembelajaran Dan Mat. Sigma, vol. 8, no. 2, pp. 459–469, 2022. doi: 10.36987/jpms.v8i2.3317.
• P. Material, H. Dan, P. Layout, and I. C. Medan, “Pengaruh Material Handling dan Penataan Layout Terhadap Efisiensi Proses Produksi Pada PT. Charoen Pokphand Indonesia Cabang Medan,” Jurnal Ilmiah Mahasiswa Teknik Industri, vol. 2, no. 2, pp. 347–360, 2023.
• Y. Suhandinata, “Perancangan Ulang Tata Letak Fasilitas Produksi dengan Metode From to Chart pada Perusahaan Meubel di CV. Esa Banyuwangi,” Jurnal Sipil Terapan, vol. 1, no. 1, pp. 192–221, 2023.
• F. K. Nurrahmat, I. Ruwana, and S. Indriani, “Perancangan Layout Fasilitas Produksi dengan Metode Algoritma BLOCPLAN untuk Mengoptimalkan Material Handling,” Jurnal Teknik Industri, vol. 8, no. 2, pp. 480–487, 2025.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Naufal Althof Dzulfaqor, Muhammad Aflah Afriadi, Moch Naufan Irwanto, Moch Ardi Anggara Sari, Atikha Sidhi Cahyana

This work is licensed under a Creative Commons Attribution 4.0 International License.
