Quality Control of Tofu Production Processes Using the Seven Tools Method
Pengendalian Kualitas Proses Produksi Tahu Dengan Menggunakan Metode Seven Tools
-
(1) * Mohammad Kharis Alwi
Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Atikha Sidhi Cahyana Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
Tofu is a food derived from soybeans which is then fermented to extract its juice. The problem that often occurs in the tofu industry is that the products produced still have a lot of defects. The purpose of this research is to identify the types of defects in tofu production and the causes of defects in tofu products and to improve product quality. The method used in this study is the seven tools method. Seven tools are 7 (seven) basic tools used to solve problems in production. The results of the research in the production process of SB tofu occurred 4 types of defects, namely defects in unequal size, defects in terms of texture, defects mixed with dirt and defects in color. The most dominant type of tofu SB defect is the type of size defect that is not the same with a percentage of 45.6%. This type of defect is caused by human, machine, material, method, and environmental factors.
Downloads
References
Efendi, M.D., Soetriono, danJulian, A.R. 2013. Indikasi Produsen Tahu Memilih Kedelai Lokal Dan Produsen Tempe Memilih Kedelai Impor Dalam Memproduksi Tahu Dan Tempe Di Kecamatan Gambiran. Jurnal Berkala Ilmiah Pertanian 1(1) : 1-10.
Haslindah, A. 2013. Analisa Pengendalian Mutu Minuman Rumput Laut Dengan Menggunakan Metode Fishbone Chart Pada PT. Jasuda Di Kabupaten Takalar. Jurnal ILTEK 7(14) : 1008-1014.
Idris, dkk. 2016. Pengendalian Kualitas Tempe Dengan Metode Seven Tools. Jurnal Teknovas. Vol. 3, No. 1. Hal. 66-80.
Iswadi,dan Didik. 2021. Modifikasi Pembuatan Tahu Dengan Penggunaan Lama Perendaman, Lama Penggilingan Dan Penggunaan Suhu Dalam Upaya Meningkatkan Kualitas Produk Tahu. Vol. 5. DOI: https://doi.org/10.32493/jitk.v5i1.7008
Ratnadi dan Suprianto.2016. Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk. Jurnal Indept. Vol. 6, No. 2. Hal. 10-18.
Rosyidi, dkk. 2020. Seven Tools untuk Menurunkan Kecacatan pada Produk Kopi. Jurnal Optimalisasi. Vol. 6, No. 2. Hal. 142-155.
Mukti, I.F., Huda, L.N., dan Matondang, A.R. 2015. Disain Perbaikan Lingkungan Kerja Guna Mereduksi Paparan Panas Kerja Operator Di PT. XY. E-Journal Teknik Industri USU 1(1) : 28-34.
Tannady, H. (2015). Pengendalian Kualitas. Yogyakarta: Graha Ilmu.
Ulkhaq, dkk. 2017. Aplikasi Seven Tools Untuk Mengurangi Cacat Produk Pada Mesin Communite Di Pt. Masscom Graphy, Semarang. Jurnal Pasti. Vol. 11, No. 3. Hal. 220-230.
Winata, S.V. 2016. Perancangan Standar Operating Procedure (SOP) Pada Chocolab. Jurnal Manajemen dan Straf-Up Bisnis 1(1) : 77-86.
Copyright (c) 2023 Mohammad Kharis Alwi, Atikha Sidhi Cahyana
This work is licensed under a Creative Commons Attribution 4.0 International License.
