Analysis of the Design of the Palm Frond Chopping Machine as a Basic Ingredient for Animal Feed
Analisis Desain Mesin Pencacah Pelepah Kelapa Sawit Sebagai Bahan Dasar Pakan Ternak
-
(1) * Imam Hanafi
Universitas Muhammadiyah Kalimantan Timur
Indonesia
(2) Anis Siti Nurrohkayati Universitas Muhammadiyah Kalimantan Timur
Indonesia
(*) Corresponding Author
Abstract
Currently, organic waste is still underutilized. If managed properly, it will produce a sale value and can also be used for various purposes. Organic waste that is still underutilized is like palm fronds. In areas especially Kalimantan, oil palm plantations are very common, the harvesting system in oil palm plantations produces fresh fruit bunches (FFB) and waste in the form of palm fronds which are piled up between the oil palm plants (gangan mati). The purpose of this research is to make a machine that can chop oil palm fronds into animal feed. Before making a coconut frond chopping machine, the design and force calculations are made first. The amount of torque obtained is 1,300 kg.f.mm, the motor power used in the initial design is 3 Hp, and the length of the belt used using pulley 1 with a diameter of 100 mm and pulley 2 with a diameter of 150 mm is A55 inch.
Downloads
References
R. Bulan, T. Mandang, W. Hermawan, D. Desrial, and A. Agussabti, “Desain dan Kinerja Mesin Terintegrasi untuk Mencacah Daun Sawit dan Mengempa Pelepah Sawit | Jurnal Keteknikan Pertanian,” JURNAL KETEKNIKAN PERTANIAN, vol. 6, no. 1, 2018, doi: 10.19028/jtep.06.1.83-90. DOI: https://doi.org/10.19028/jtep.06.1.85-92
P. Pristiansyah, H. Hasdiansah, and S. Sugiyarto, “IPTEK BAGI MASYARAKAT MESIN PENCACAH PELEPAH DAN DAUN KELAPA SAWIT UNTUK PAKAN SAPI DI DESA SEMPAN,” Jurnal Pengabdian Masyarakat Polmanbabel, vol. 1, no. 01, pp. 1–7, Mar. 2021, doi: 10.33504/dulang.v1i01.150. DOI: https://doi.org/10.33504/dulang.v1i01.150
P. Anwar and M. Y. Nasution, “MESIN PENCACAH PERANCANGAN MESIN PENCACAH PELEPAH SAWIT UNTUK PAKAN TERNAK DENGAN MENGGUNAKAN METODE DFMA (DESIGN FOR MANUFACTURE ANDASSEMBLY): PELEPAH,” Jurnal Aplikasi Teknologi, vol. 13, no. 1, pp. 14–20, Jan. 2021, doi: 10.30606/aptek.v13i1.498. DOI: https://doi.org/10.30606/aptek.v13i1.498
A. Rizali, F. Fachrianto, M. H. Ansari, and A. Wahdi, “PEMANFAATAN LIMBAH PELEPAH DAN DAUN KELAPA SAWIT MELALUI FERMENTASI Trichoderma sp. SEBAGAI PAKAN SAPI POTONG,” EnviroScienteae, vol. 14, no. 1, pp. 1–7, Apr. 2018, doi: 10.20527/es.v14i1.4886. DOI: https://doi.org/10.20527/es.v14i1.4886
R. Manalu, “Analisis Peran Aktor Dalam Keberhasilan Implementasi Teknologi Pengolahan Pakan Ternak Sapi,” INOVASI, vol. 16, no. 1, pp. 42–50, May 2020, doi: 10.30872/jinv.v16i1.6364.
R. Subarkah, G. Heryana, F. Wijayanti, A. Ekayuliana, and I. Irwandi, “RANCANG BANGUN SISTEM PENDINGIN MOTOR LISTRIK MENGGUNAKAN WATER JACKET LILITAN PIPA PIPIH,” Prosiding Seminar Nasional NCIET, vol. 1, no. 1, pp. 59–66, Dec. 2020, doi: 10.32497/nciet.v1i1.29. DOI: https://doi.org/10.32497/nciet.v1i1.29
C. Sutowo, E. Diniardi, and M. Yanto, “PERENCANAAN MESIN PENGHANCUR PLASTIK KAPASITAS 30 KG/JAM,” SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, vol. 4, no. 2, Dec. 2010.
E. K. Laksanawati and R. Rofiroh, “Analisis Sistem Transmisi Pada Mesin Pemintal Benang Dengan Kapasitas 3 Cons,” Motor Bakar : Jurnal Teknik Mesin, vol. 4, no. 1, pp. 1–7, Jan. 2020, doi: 10.31000/mbjtm.v4i1.5706. DOI: https://doi.org/10.31000/mbjtm.v4i1.5706
D. R. Pattiapon, J. J. Rikumahu, and M. Jamlaay, “Penggunaan Motor Sinkron Tiga Phasa Tipe Salient Pole Sebagai Generator Sinkron,” JURNAL SIMETRIK, vol. 9, no. 2, pp. 197–207, Dec. 2019, doi: 10.31959/js.v9i2.386. DOI: https://doi.org/10.31959/js.v9i2.386
A. B. Hendrawan and M. T. Qurohman, “DESAIN MESIN CNC ROUTER 3 AXIS BERBANTU PERANGKAT LUNAK AUTODESK INVENTOR,” Nozzle : Journal Mechanical Engineering, vol. 10, no. 1, pp. 1–5, Jan. 2021, doi: 10.30591/nozzle.v10i1.2412.
Copyright (c) 2023 Imam Hanafi, Anis Siti Nurrohkayati
This work is licensed under a Creative Commons Attribution 4.0 International License.
