Maintenance Service Cost Emphasize Dump Truck Volvo FMX 440 at PT Iwaco Jaya Abadi Site Kideco Penekanan Biaya Pemeliharaan Dump Truk Volvo FMX 440 Di PT Iwaco Jaya Abadi Site Kideco
Main Article Content
Maintenance is a series of activities to keep facilities and equipment in a ready-to-use state to carry out production effectively and efficiently according to a predetermined schedule and based on standards. In this research, the author emphasizes the cost of maintenance service and the use of Petronas SAE 15W-40 engine oil on the VOLVO FMX 440, Dump truck unit, which is carried out according to service intervals, namely every 250, 500, 1000, and 2000 hours. The research method used is preventive maintenance which in this method prevents damage to the unit in operation by scheduling routine maintenance. In this method, replace components so that the unit's life can be longer, and minimize damage. This study aims to emphasize the cost of replacing and using Petronas SAE 15W-40 engine oil on the VOLVO FMX 440 Dump Truck unit which is claimed to last up to 500 hours of operation, so that engine oil changes in 250 hours and 750 hours do not need to be replaced with engine oil, but by replacing the Oil engine every 500 hours of operation, it can save service costs which initially amounted to Rp. 639,104,145.00/year to Rp. 578,472,585.00/year, and for the use of an oil engine in one year which was initially Rp. 126.755,080.00 /year to only Rp66,143,520.00/year.
This work is licensed under a Creative Commons Attribution 4.0 International License.
 H. Awaldy, “PERBANDINGAN BIAYA CORRECTIVE DAN PREVENTIVE MAINTENANCE PADA MESIN CRACK BREAKER CONVEYOR DI PT. PERKEBUNAN NUSANTARA V SEI PAGAR,” Undergraduate Thesis, Universitas Islam Negeri Sultan Syarif Kasim Riau, 2021.
 D. Darsini, “PERIODICAL MAINTENANCE SERVICE VOLVO TRUCK FMX 440 DI PT MADHANI TALATAH NUSANTARA,” Injection: Indonesian Journal of Vocational Mechanical Engineering, vol. 2, no. 2, pp. 59–63, Aug. 2022, doi: 10.58466/injection.v2i2.393.
 M. Taufany, “Service Berkala 250 HM Pada Dump Truck (DT) Volvo FMX 400,” Politeknik Negeri Tanah Laut, Kalimantan Selatan, Internship Report, 2020.
 A. Surbakti, “PENGARUH JENIS OLI TERHADAP KONSUMSI BAHAN BAKAR SEPEDA MOTOR 125 CC,” PISTON (Jurnal Ilmiah Teknik Mesin Fakultas Teknik UISU), vol. 4, no. 1, pp. 1–6, 2019.
 I. Hanafi and A. S. Nurrohkayati, “Preventive Maintenance Planning 500 Hm on Dump Truck Mercedes Benz Axor 4843k at PT. Mega Jasa Karya Bersama Site PT. Baramulti Sukses Sarana:,” PELS, vol. 2, no. 2, Sep. 2022, doi: 10.21070/pels.v2i2.1275.
 M. Djunaidi and E. Bakdiyono, “MINIMASI BIAYA PERAWATAN DENGAN MENGGUNAKAN METODE PREVENTIVE MAINTENANCE POLICY,” Jurnal Ilmiah Teknik Industri, vol. 11, no. 2, pp. 198–208, Dec. 2012, doi: https://doi.org/10.23917/jiti.v11i2.926.
 G. P. Alhadi, D. A. A. Ritonga, and J. Junaidi, “Penentuan Interval Waktu Maintenance Forklift Terhadap Komponen Kritis Berdasarkan Data Kerusakan Mesin Menggunakan Metode Preventive Age Replacement (Studi Kasus: PT. XXX),” JiTEKH, vol. 9, no. 1, pp. 1–7, Mar. 2021, doi: 10.35447/jitekh.v9i1.317.
 H. Winarno, “PERAWATAN ALAT (HEAVY EQUIPMENT) DENGAN PENJADWALAN MENGGUNAKAN METODE PREVENTIVE MAINTENANCE DI PT PURNA BAJA HARSCO,” ReTII, no. 10, 2017.
 R. Samsinar, D. Almanda, and E. Priatna, “Sistem Pengingat Ganti Oli Berdasarkan Running Hours Mesin, Lama Waktu Pemakaian dan Kekentalan Oli pada Mesin Wire Drawing Berbasis Raspberry Pi 1,” RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer), vol. 2, no. 2, pp. 121–130, Nov. 2019, doi: 10.24853/resistor.2.2.121-130.