Paid Board Prototype With Monitoring Google Sheet
Prototype Celengan Uang Kertas dengan Monitoring Google Sheet
-
(1) * Rakhmad Fajar Ashari
Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Arief Wisaksono Universitas Muhammadiyah Sidoarjo
Indonesia
(3) Indah Sulistiyowati Universitas Muhammadiyah Sidoarjo
Indonesia
(4) Akhmad Ahfas Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
Many people prefer the money deposit box as a method of money storage even if there are many different types of useful places to do so. As a result, a Banknote Piggy Bank Prototype with Google Sheet Monitoring was created. a device that provides data on the amount of money saved. to use RFID as an access tool to scan ID cards. Three ID cards are included with this tool: a savings ID card, an unregistered ID card, and an ID card that may be used to withdraw money from savings accounts. The TCS34725 sensor is used in the design to read the money's nominal value and detect color. 20X4 LCD is being used as a display. can use a Wemos d1 small to monitor data after it has been saved and shown in a Google SpreadSheet. The piggy bank door lock employs a Servo Motor SG 90 for media, a Relay to start the motor, and an RTC Ds1307 to display the time and date. For use as a method of lowering the voltage in the system circuit is the LM2596 Regulator module. While the entire system needs an Arduino Microcontroller to be controlled.
Downloads
References
[2] A. Murtani, “Sosialisasi Gerakan Menabung,” Semin. Nas. Has. Pengabdi. Kpd. Masy. 2019 Sindimas, vol. 1, no. 1, pp. 279–283, 2019.
[3] A. P. Zanofa, R. Arrahman, M. Bakri, and A. Budiman, “Pintu Gerbang Otomatis Berbasis Mikrokontroler Arduino Uno R3,” J. Tek. dan Sist. Komput., vol. 1, no. 1, pp. 22–27, 2020, doi: 10.33365/jtikom.v1i1.76.
[4] N. M. Yohanes, Saghoa Sompie, Sherwin R.U.A., Tulung, “Kotak Penyimpanan Uang Berbasis Mikrokontroler Arduino Uno,” J. Tek. Elektro dan Komput., vol. 7, no. 2, pp. 167–174, 2018.
[5] A. A. E. L. Andi, “Kunci Pintu Otomatis Menggunakan RFID,” vol. 6, no. 1, pp. 43–48, 2018.
[6] D. Satria and Y. Yanti, “Rancang Bangun Sistem Penjadwalan Bel Sekolah Berbasis Arduino Uno dengan Antarmuka Berbasis Web Menggunakan Ethernet Web Server Dedi,” Serambi Eng., vol. II, no. 3, pp. 141–147, 2017, [Online]. Available: http://jurnalserambiengineering.net/wp-content/uploads/2017/07/Rancang-Bangun-Sistem-Penjadwalan-Bel-Sekolah-Berbasis-Arduino-Uno-dengan-Antarmuka-Berbasis-Web-Menggunakan-Ethernet-Web-Server.pdf.
[7] S. Samsugi, A. I. Yusuf, and F. Trisnawati, “Sistem Pengaman Pintu Otomatis Dengan Mikrokontroler Arduino Dan Module Rf Remote,” J. Ilm. Mhs. Kendali dan List., vol. 1, no. 1, pp. 1–6, 2020, doi: 10.33365/jimel.v1i1.188.
[8] C. Gunawan, F. Fauziah, and N. Hayati, “Prototipe Light Meter Fotografi Studio Menggunakan Mikrokontroler ATMega328 Berbasis Sensor Cahaya dan Warna,” J. Media Inform. Budidarma, vol. 5, no. 3, p. 769, 2021, doi: 10.30865/mib.v5i3.3043.
[9] Z. Lubis, D. Jurusan, and T. Elektro, “Perancangan Terbaru Alat Pemberi Informasi Arah Kiblat digunakan untuk Penyandang Tunanetra Zulkarnain Lubis,” Cetak) J. Electr. Technol., vol. 7, no. 1, pp. 1–5, 2022.
[10] F. A. Pradana, N. Kholis, S. I. Haryudo, and S. Zuhrie, “Rancang Sistem Kontrol Motor DC Pada Konveyor Pakan Ayam Berbasis Internet of Things,” pp. 201–207.
[11] N. Mastiana, A. Ulvan, and M. Ulvan, “Sistem Peringatan Dini Untuk Pengendalian Pembatasan Jarak Fisik Dengan Metode RSSI Menggunakan Modul Wemos D1 Mini,” J. Rekayasa Elektr., vol. 17, no. 4, 2021, doi: 10.17529/jre.v17i4.21650.
Copyright (c) 2022 Rakhmad Fajar Ashari, Arief Wicaksono, Indah Sulistiyowati, Akhmad Ahfas
This work is licensed under a Creative Commons Attribution 4.0 International License.
