Sub Distribution Panel’s Design Rancangan SubDistribution Panel
Rancangan Desain Panel Sub Distribusi Rancangan Panel Sub Distribusi
-
(1) * Dikas Pandu Nanggala
Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Akhmad Ahfas Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
Electrical panels play an important role as the center of electrical energy distribution, functioning to regulate the flow of electricity in a building. This distribution process requires something that can secure and divide the amount of power flowing, therefore the SDP (Sub Distribution Panel) panel is needed. This panel contains several components that are assembled into one unit so that it can function properly. This research uses a qualitative descriptive method that focuses on problems based on facts carried out by means of observation or observation, interviews, and studying documents. If all the techniques in this method are performed successfully, the accurate percentage of this research is 98%. This research produces a description of the process of making SDP panels from start to finish. This research resulted that the SDP panel has several functions, namely collecting and forwarding power to each load in each branch as needed, connecting and disconnecting the power distribution circuit and the safety of the power distribution system control.
Downloads
References
Emanuella Vanda Harianto and Ronny H. Mustamu, “ANALISIS STRATEGI BERSAING PERUSAHAAN PANEL LISTRIK,” 2014.
William Al Firdauz and Ulinnuha Latifa, “Perancangan Sub Distribution Panel (SDP) Di Electrical Department PT Tiga Pilar Energi Proyek Riau Andalan Pulp and Paper (RAPP),” 2023. DOI: https://doi.org/10.30736/jt.v15i2.1041
Sri Lindawati and Muhammad Hendri, “PENGGUNAAN METODE DESKRIPTIF KUALITATIF UNTUK ANALISIS STRATEGI PENGEMBANGAN KEPARIWISATAAN KOTA SIBOLGA PROVINSI SUMATERA UTARA,” Oct. 2016.
Basuki Nur Utomo and Haiban Agus Salim, Instalasi Panel Distribusi Tenaga Listrik. Klaten: PT. Saka Mitra Kompetensi, 2017.
Mohamad Yasfin Imanuddin and Fendi Achmad, “Perencanaan Sistem Proteksi Pada Distribusi Tenaga Listrik Pada Proyek Kyo Apartment di PT. Alkonusa Teknik Interkon,” vol. 5, no. 1, 2023.
J. Praharto, F. Ariwibowo, and F. Teknik Elektro Sekolah Tinggi Teknik Wiworotomo, “ITEKS Intuisi Teknologi Dan Seni 78 Implementasi PUIL 2000 Pada Instalasi Listrik Rumah”.
Muhamad Juhan Dwi Suryanto and Tri Rijanto, “RANCANG BANGUN ALAT PENCATAT BIAYA PEMAKAIAN ENERGI LISTRIK PADA KAMAR KOS MENGGUNAKAN MODUL GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS(GSM) 800L BERBASIS ARDUINO UNO,” vol. 8, no. 1, 2019.
Tony Koerniawan, Aas Wasri Hasanah, and Yuliansyah, “Kajian Ketelitian Current Transformer (CT) Terhadap Kesalahan Rasio Arus pada Pelanggan 197 kVA,” vol. 11, no. 1, 2019. DOI: https://doi.org/10.33322/energi.v11i1.390
Adinda Pratiwi and Rita Intan Permatasari, “PENGARUH DISIPLIN KERJA DAN FASILITAS KERJA TERHADAP PRODUKTIVITAS KERJA BURUH DIVISI PRODUKSI PT. MULTI ELEKTRIK SEJAHTRINDO, CITEUREUP KABUPATEN BOGOR,” vol. 3, no. 1, Nov. 2022. DOI: https://doi.org/10.47065/ekuitas.v3i3.1314
A. Hari Wibowo Sekolah Menengah Kejuruan Negeri and P. Bantul, “UPAYA MENINGKATKAN KOMPETENSI MENGGAMBAR AUTOCAD DENGAN METODE PEER TUTORING DI KELAS XI DPIB A DI SMK NEGERI 1 PAJANGAN BANTUL,” International Journal of Educational Resources, 2021.
Copyright (c) 2024 Dikas Pandu Nanggala, Akhmad Ahfas
This work is licensed under a Creative Commons Attribution 4.0 International License.
