Implementation of RFID for Verification of PC Usage in the UMSIDA’s Electrical Engineering Laboratory Based on the Internet of Things
Implementasi RFID untuk Verifikasi Penggunaan PC di Laboratorium Teknik Elektro Umsida Berbasis Internet Of Things
-
(1) * Muhammad Drajad Kuncoro Aji
Indonesia
(2) Jamaaluddin Jamaaluddin Universitas Muhammadiyah Sidoarjo
Indonesia
(3) Izza Anshory Universitas Muhammadiyah Sidoarjo
Indonesia
(4) Akhmad Ahfas Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
Every day visitors to the UMSIDA electrical engineering laboratory have different goals. The main function of the laboratory is as a practicum for electrical engineering students and is also used to work on coursework. This study aims to control the use of laboratory PCs using Internet of Things-based RFID card verification. The application of RFID connected to the Wemos D1 Mini is expected to be able to reduce unexpected actions such as theft and hacking of data on the PC. The PC will be installed with an RFID reader to verify the RFID card as the initial stage of PC use. The results of the research trials showed that by bringing the RFID card from 0 cm to 2.5 cm closer to the RFID reader, the RFID card was successfully verified effectively. When the RFID card is successfully verified by the RFID reader, the PC will automatically turn on, the verification results will be displayed on the 16 x 2 LCD and android smartphone so that they can monitor every time and get an android notification that sends information that the verification process was successful and the PC is on. Laboratory PCs are safer from unwanted use by using RFID technology that is connected to the Wemos D1 Mini for monitoring and controlling via a smartphone remotely in real-time because before using a PC, it must go through a verification process.
Downloads
References
J. Jamaaluddin, “Utilization of Solar Power Plant as an Alternative Energy Sources Solar Applications in Building System,” J. Sci. Appl. Eng., vol. 1, no. 2, pp. 83–87, 2018, doi: 10.31328/jsae.v1i2.890. DOI: https://doi.org/10.31328/jsae.v1i2.890
Jamaaluddin, I. Robandi, and I. Anshory, “A very short-term load forecasting in time of peak loads using interval type-2 fuzzy inference system: A case study on java bali electrical system,” J. Eng. Sci. Technol., vol. 14, no. 1, pp. 464–478, 2019.
J. Jamaaluddin, “Sistem Kontrol Pendingin Mobil Ramah Lingkungan Berbasis Android,” Cyclotron, vol. 2, no. 1, 2019, doi: 10.30651/cl.v2i1.2528. DOI: https://doi.org/10.30651/cl.v2i1.2528
R. Ahmad, “Perancangan Sistem Absensi Mahasiswa Terintegrasi dengan Sistem Akademik Menggunakan Teknologi RFID Ahmad,” no. November, pp. 1–13, 2018.
R. L. Singgeta and P. Manembu, “Sistem Pengamanan Pintu Rumah Dengan Rfid Berbasis Wireless Esp8266,” vol. 2018, no. Ritektra, pp. 2–3, 2018, doi: 10.31219/osf.io/9q4z7. DOI: https://doi.org/10.31219/osf.io/9q4z7
S. D. UTOMO, “Price Display Using Wemos,” 2018.
R. F. Putra, K. M. Lhaksmana, and D. Adytia, “Aplikasi IoT untuk Rumah Pintar dengan Fitur Prediksi Cuaca,” e-Proceeding Eng., vol. 5, no. 1, pp. 1746–1760, 2018, [Online]. Available: https://openlibrary.telkomuniversity.ac.id/pustaka/files/141262/jurnal_eproc/aplikasi-iot-untuk-rumah-pintar-dengan-fitur-prediksi-cuaca.pdf.
M. Natsir, D. B. Rendra, and A. D. Y. Anggara, “Implementasi IOT Untuk Sistem Kendali AC Otomatis Pada Ruang Kelas di Universitas Serang Raya,” J. PROSISKO Vol. 6 No. 1, vol. 6, no. 1, 2019.
I. Anshory, D. Hadidjaja, and I. Sulistiyowati, “Monitoring Perubahan Tegangan dan Pemodelan Matematika Fungsi Transfer Motor BLDC Dengan System Identification Toolbox Program Studi Teknik Elektro , Fakultas Saintek , Universitas Muhammadiyah Sidoarjo,” pp. 18–25.
I. Anshory, I. Robandi, J. Jamaaluddin, A. Fudholi, and Wirawan, “Transfer function modeling and optimization speed response of BLDC motor e-bike using intelligent controller,” J. Eng. Sci. Technol., vol. 16, no. 1, pp. 305–324, 2021.
A. Ahfas, M. B. Ulum, D. H. R. Saputra, and S. Syahrorini, “Automatic Spray Desinfectant Chicken with Android Based on Arduino Uno,” IOP Conf. Ser. Earth Environ. Sci., vol. 519, no. 1, 2020, doi: 10.1088/1755-1315/519/1/012013. DOI: https://doi.org/10.1088/1755-1315/519/1/012013
A. Ahfas, D. Hadidjaja, S. Syahrorini, and J. Jamaaluddin, “Implementation of ultrasonic sensor as a chemical percol fluid level control based on Atmega 16,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1098, no. 4, p. 042046, 2021, doi: 10.1088/1757-899x/1098/4/042046. DOI: https://doi.org/10.1088/1757-899X/1098/4/042046
I. Anshory, D. Hadidjaja, and R. B. Jakaria, “BLDC Motor : Modeling and Optimization Speed Control Using Firefly Algorithm,” Dinamik, vol. 25, no. 2, pp. 51–58, 2020, doi: 10.35315/dinamik.v1i25.7851. DOI: https://doi.org/10.35315/dinamik.v1i25.7851
