The System Monitoring Laboratorium Electrical Engineering With Internet of Things Based To Be Smaart Campus
Sistem Monitoring Laboratorium Teknik Elektro Berbasis Internet of Things Menuju Smart Campus
-
(1) * Sholihuddin Ayyubi
Program Studi Teknik Elektro, Fakultas Sains dan teknologi, Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Izza anshory
Indonesia
(3) Indah Sulistyowati
Indonesia
(4) Dwi Hadidja
Indonesia
(*) Corresponding Author
Abstract
Security is needed in all places, especially in an institution where there are expensive and important equipment, therefore we need a security device system to facilitate handling as early as possible. In this case we can take advantage of technology that contains the concept of smart laboratory which is applied to the laboratory room of the electrical engineering faculty of Muhammadiyah University of Sidoarjo. By utilizing NodemCU as a microcontroller combined with a mini Arduino, RFID is a laboratory user identification that is used as a trigger for the locked or opening of the Doorlock solenoid, monitoring the opening and closing of the doorlock solenoid can be monitored or via a smartphone via a notification sent by nodemCU via the Blynk application platform, that the device create an internet of things system and monitor laboratory conditions in real timeDownloads
References
H. Shull, “The overhead headache,” Science (80-. )., vol. 195, no. 4279, p. 639, 1977. DOI: https://doi.org/10.1126/science.195.4279.639
J. A. Hall, “ACCOUNTING INFORMATION SYSTEM (Buku 1 Edisi 4),” ウイルス, vol. 52, no. 1, pp. 1–5, 2002.
K. Basuki, “済無No Title No Title,” ISSN 2502-3632 ISSN 2356-0304 J. Online Int. Nas. Vol. 7 No.1, Januari – Juni 2019 Univ. 17 Agustus 1945 Jakarta, vol. 53, no. 9, pp. 1689–1699, 2019.
F. Mannello and G. A. Tonti, “Tinjauan Pustaka RFID,” Stem Cells, vol. 25, no. 7, pp. 1603–1609, 2007. DOI: https://doi.org/10.1634/stemcells.2007-0127
I. Anshory, D. Hadidjaja, and R. B. Jakaria, “Bldc Motor : Modeling and Optimization Speed Control Using Firefly Algorithm,” Dinamik, vol. 25, no. 2, pp. 51–58, 2020. DOI: https://doi.org/10.35315/dinamik.v1i25.7851
I. ANSHORY, I. ROBANDI, J. Jamaaluddi, A. FUDHOLI, and WIRAWAN, “Transfer function modeling and optimization speed response of bldc motor e-bike using intelligent controller,” J. Eng. Sci. Technol., vol. 16, no. 1, pp. 305–324, 2021.
A. Hazarah, “Rancang Bangun Smart Door Lock Menggunakan Qr Code Dan Solenoid,” J. Teknol. Inf. dan Terap., vol. 4, no. 1, pp. 5–10, 2019. DOI: https://doi.org/10.25047/jtit.v4i1.14
B. A. B. Ii, D. Teori, and D. A. N. Tinjauan, “Blynk,” pp. 3–8.
