IoT Based Smart Cupboard Design
Rancang Bangun Smart Cupboard Berbasis IoT
-
(1) * Trio Atmojo
Program Studi Teknik Elektro Fakultas Sains dan Teknologi Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Ayuni Prodi Teknik Elektro Fakultas Sains dan Teknologi Universitas Muhammadiyah Sidoarjo
Indonesia
(3) Indah Sulistyowati Prodi Teknik Elektro Fakultas Sains dan Teknologi Universitas Muhammadiyah Sidoarjo
Indonesia
(4) Arief Wicaksono Prodi Teknik Elektro Fakultas Sains dan Teknologi Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
During the rainy season, the clothes can dry for 1 day or more. Often times when on the way home from work or school it is trapped in rain so that the clothes used are little damp, because the clothes are still used for tomorrow so the clothes are not possible to wash and can dry overnight. easy to open or break into by anyone, given the habit of people used to storing valuables in the cupboard, an extra security system is needed. Then a IOT-Based Smart Cupboard Design is made which aims to improve the function of a conventional wardrobe to be multifunctional, which is equipped with a damp clothes dryer feature and is equipped with a Fingerprint sensor which can only be accessed by the owner to open the wardrobe. to be equipped with a Fingerprint, which functions as extra security in opening cabinets where valuables are usually found. Also equipped with a fan and heater incubator functions in drying damp clothes. This tool is equipped with an IoT which functions as an On Off control for the fan and an incubator heater in heating damp clothes.Downloads
References
S. Jari and B. Internet, “RANCANG BANGUN MINIATUR PENGAMAN PINTU OTOMATIS MENGGUNAKAN SIDIK JARI BERBASIS INTERNET of THINGS (IoT),” pp. 1–13, 2018. DOI: https://doi.org/10.37638/gatotkaca.v1i1.63
S. Pada, M. Baitul, and M. Pucu, “1,2,3),” vol. 1, no. 2, pp. 8–11, 2020.
M. Atmega, E. Yuliza, and T. U. Kalsum, “Alat Keamanan Pintu Brankas Berbasis Sensor Sidik Jari Dan Passoword Digital Dengan Menggunakan,” vol. 11, no. 1, pp. 1–10, 2015.
S. Sidik and J. Berbasis, “RANCANG BANGUN PENGAMAN PINTU PERSONAL ROOM MENGGUNAKAN SENSOR SIDIK JARI BERBASIS ARDUINO Hengky Yalandra 1 , Putra Jaya 2 2,” vol. 7, no. 2, 2019. DOI: https://doi.org/10.24036/voteteknika.v7i2.104347
A. Wisaksono, M. I. Mauliana, and N. Ariyanti, “MONITORING DAN PENGENDALIAN PENGGUNAAN ENERGI PADA GEDUNG BERTINGKAT MENGGUNAKAN NODEMCU ESP 8266,” pp. 178–185, 2019.
P. Akhir, MAGNETIC DOOR LOCK MENGGUNAKAN KODE PENGAMAN BERBASIS AT MEGA 328. 2012.
Sayid Ridho, Alat Penetas Telur Otomatis Berbasis Mikrokontroler. 2019.
M. P. T. Sulistyanto, K. B. Pranata, A. N. Afandi, S. Sendari, and I. Sulistiyowati, “Monitoring electrical energy in electronic energy audits through internet of things technology,” J. Phys. Conf. Ser., vol. 1402, no. 7, 2019, doi: 10.1088/1742-6596/1402/7/077067. DOI: https://doi.org/10.1088/1742-6596/1402/7/077067
