The Effect of Periodic Vibration and Thermal Temperature Inspection on Cane Carrier Machine at PT. PG Candi Baru
Pengaruh Pengecekan Berkala Getaran dan Suhu Termal terhadap Mesin Cane Carrier PT. PG Candi Baru
DOI:
https://doi.org/10.21070/eye6bd77Keywords:
Vibration monitoring, Thermal inspection, Cane carrier, Preventive maintenance, Sugar millingAbstract
General Background Sugarcane processing requires continuous and reliable mechanical systems, particularly at the initial material handling stage where cane carrier machines transport sugarcane from the reception area to the milling station. Specific Background Excessive vibration and abnormal temperature increases on cane carrier components serve as primary indicators of mechanical failures such as bearing wear, shaft misalignment, and lubrication issues. Knowledge Gap Although periodic condition monitoring is vital, empirical evaluations examining the combined effects of periodic vibration and thermal inspections on machinery reliability during seasonal sugar milling operations require thorough documentation. Aims This study investigates the effect of periodic vibration and thermal temperature inspections on the performance and reliability of the cane carrier machine at PT PG Candi Baru. Results Findings indicate that periodic inspections successfully detect early symptoms of machine degradation, minimize unplanned downtime, and support preventive maintenance implementation. Novelty A systematic condition-monitoring approach is established by integrating vibration meter measurements and infrared thermal assessments directly into seasonal cane carrier operations. Implications Routine monitoring of vibration and thermal parameters significantly contributes to maintaining equipment performance and extending operational service life.
Key Findings Highlights
-
Periodic vibration and thermal inspections enable early detection of mechanical anomalies like bearing wear and shaft misalignment.
-
Routine condition monitoring minimizes unexpected mechanical failures and reduces unplanned production downtime.
-
Systematic performance tracking of critical components successfully extends the operational service life of industrial cane carriers.
Keywords Vibration monitoring, Thermal inspection, Cane carrier, Preventive maintenance, Sugar milling
References
D. D. Arimad, B. Susilo, and S. H. Sumarlan, “Analisis Efisiensi Pada Belt Conveyor Untuk Meningkatkan Efisiensi Proses Pengangkutan Tebu Di Pabrik Gula Kebonagung,” Jurnal Keteknikan Pertanian Tropis dan Biosistem, vol. 3, no. 2, pp. 112–120, 2015.
D. B. Setyawan, “Vibration Analysis,” Jurnal Teknik Mesin, vol. 2, pp. 921–930, 2013.
M. Intan and D. Maulina, “Analisis Kerusakan Komponen Meknis pada Mesin Konveyor,” Jurnal Rekayasa Mesin, vol. 4, no. 1, pp. 45–52, 2018.
N. Evalina, J. Susilo, and A. Amiruddin, “Perancangan Sistem Monitoring Suhu dan Getaran pada Bearing Motor Induksi,” Jurnal Teknologi Elektro, vol. 15, no. 2, pp. 88–95, 2024.
J. Rekayasa et al., “Penentuan Jadwal Preventive Maintenance Mesin-Mesin di Stasiun Gilingan (Studi Kasus PG. Lestari Kertosono),” Jurnal Rekayasa Mesin, vol. 3, no. 3, pp. 485–494, 2012.
R. Gigi, “Condition Monitoring of Rotating Equipment in Sugar Industry,” International Journal of Mechanical Engineering, vol. 8, no. Sep, pp. 130–134, 2009.
Y. W. Prasetya, B. D. Argo, and W. A. Nugroho, “Perencanaan Sistem Penyalur Daya Pada Perancangan Portable Belt Conveyor Untuk Meningkatkan Efisiensi Proses Pengangkutan Tebu Di Pabrik Gula Kebonagung Malang,” Jurnal Keteknikan Pertanian Tropis dan Biosistem, vol. 2, no. 3, pp. 246–255, 2014.
M. N. R, S. H. Sumarlan, and R. Yulianingsih, “Uji Performansi Prototype Belt Conveyor Pengangkut Tebu di Perusahaan Gula Kebon Agung – Malang,” Jurnal Keteknikan Pertanian Tropis dan Biosistem, vol. 2, no. 3, pp. 269–278, 2014.
E. Nursanti and T. Priyasmanu, “Analisis Keandalan Mesin di Stasiun Gilingan dengan Menggunakan Metode Reliability Centered Maintenance II (RCM II) pada PG Kebon Agung,” Jurnal Optimasi Sistem Industri, vol. 10, no. 2, pp. 112–120, 2011.
Y. Eunike, S. Situmorang, Y. D. Handoyo, and M. Dwiyaniti, “Kinerja Sistem Monitoring Suhu Dan Getaran Pada Turbin Uap Berbasis HMI-PLC,” Jurnal Teknik ITS, vol. 5, no. 2, pp. 1–9, 2016.
Aivianto and R. Firdaus, “The Effect of Periodic Vibration and Thermal Temperature Inspection on Cane Carrier Machine at PT. PG Candi Baru,” UMSIDA, 2026.
2867 Artikel+Magang_ARIVIANTO_231020200083-TEKNIK+MESIN.docx
B. Santoso and D. Irawan, “Evaluasi Getaran Mekanis pada Mesin Pemindah Bahan di Industri Agro,” Jurnal Ilmiah Teknik Mesin, vol. 11, no. 1, pp. 23–30, 2021.
H. Prasetyo and D. Sutopo, “Penerapan Predictive Maintenance Berbasis Analisis Suhu dan Getaran pada Pabrik Gula,” Jurnal Optimalisasi Sistem Industri, vol. 19, no. 2, pp. 101–110, 2020.
W. Santoso and Y. Kurniawan, “Analisis Keausan Bantalan dan Sistem Transmisi pada Mesin Konveyor Berat,” Jurnal Rekayasa Mesin, vol. 13, no. 2, pp. 415–422, 2022.
F. Rahman and R. Hidayat, “Strategi Perawatan Mesin Berkelanjutan untuk Meningkatkan Efisiensi Musim Giling di Pabrik Gula,” Jurnal Sistem dan Manajemen Industri, vol. 6, no. 2, pp. 85–94, 2022.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Arivianto Arivianto; Rachmat Firdaus
This work is licensed under a Creative Commons Attribution 4.0 International License.
