Analysis of the Causes of the Reduction in Heat Exchanger E301 Pressure Analisa Penyebab Terjadinya Penurunan Tekanan Heat Exchanger E301

Article Sidebar

Published: Mar 15, 2024
DOI: https://doi.org/10.21070/pels.v7i0.1528
Keywords:
Production Process, Blockage, Exchangere

Main Article Content

Faris Ferdiansyah
Universitas Muhammadiyah Sidoarjo
Rachmat Firdaus
Universitas Muhammadiyah Sidoarjo

Abstract

The production process at PT ALP Petro Industry often occurs when the tubes in the Heat Exchanger are blocked to heat the used oil which will then be processed further. Before passing through the heat exchanger, the used oil has an oil filter, then the oil passes through a small tube which has been heated with steam, where over time the tube will become clogged due to dirt. Over time, these deposits accumulate and a blockage occurs in the tube exchanger area. If a blockage occurs, the pressure in the tube will automatically experience a pressure drop due to deposits in the Heat Exchanger tube. Therefore, this problem requires an analysis of what can minimize the occurrence of pressure drops.


Highlights:


  • Tube blockages disrupt production efficiency.

  • Pressure drop due to blockages affects system performance.

  • Analysis needed for prevention measures.

Keywords: Production Process, Blockage, Exchangere

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
F. Ferdiansyah and R. Firdaus, “ Analysis of the Causes of the Reduction in Heat Exchanger E301 Pressure”, PELS, vol. 7, pp. 555-562, Mar. 2024.
Issue
Vol 7 (2024): Proceedings of the 7th Seminar Nasional Sains 2024
Section
Mechanical Engineering
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

References

[1] N. Nurhasanah and D. C. Pratiwi, "Evaluasi Kinerja Heat Exchanger 05 (HE-05) Pusat Pengembangan Sumber Daya Manusia Minyak dan Gas Bumi Cepu (PPSDM MIGAS Cepu)," Majalah Ilmiah Swara Patra, vol. 12, no. 2, 2022. [Online]. Available: https://doi.org/10.37525/sp/2022-01/340
[2] D. Rahmawaty and I. H. Hadi, "Design of Tube Temperature Control System on Mini Plant Shell and Tube Heat Exchanger Study Program of D3 Metrology and Instrumentation Department of Engineering Physics Faculty of Industrial Technology Sepuluh November Institute of Technology Surabaya," 2016.
[3] R. Syahputra, "Simulasi Pengendalian Temperatur pada Heat Exchanger Menggunakan Teknik Neuro-Fuzzy Adaptif," in Jurnal Teknologi, vol. 8, no. 2, 2015.
[4] A. T. Wahyudi, F. Leestiana, and R. Widodo, "Evaluasi Kinerja Heat Exchanger pada Fasilitas Kilang PPSDM Migas dengan Metode Perhitungan Fouling Factor," Majalah Ilmiah Swara Patra, vol. 12, no. 1, 2022. https://doi.org/10.37525/sp/2022-1/322
[5] B. Wisely Ziliwu et al., "Pengoperasian dan Perawatan Sistem Pendingin pada Mesin Induk Kapal KM. Sido Mulyo Santoso di PPN Sibolga Operation and Maintenance of Cooling System on Main Engine KM. Sido Mulyo Santoso at PPN Sibolga," www.maritimeworld.web.id, 2021.