The Effect of Periodic Vibration and Thermal Temperature Checks on the Drive Motor of the Cane cutter Machine at PT. PG. Candi Baru

Pengaruh Pengecekan Berkala Getaran dan Suhu Termal Terhadap Motor Penggerak Mesin Cane cutter PT. PG. Candi Baru

Authors

  • Pradita Rafi Ibrani Program Studi Teknik Mesin, Fakultas Sains dan Teknologi, Universitas Muhammadiyah Sidoarjo
  • Mulyadi Program Studi Teknik Mesin, Fakultas Sains dan Teknologi, Universitas Muhammadiyah Sidoarjo

DOI:

https://doi.org/10.21070/7f7vxt93

Keywords:

Cane Cutter, Vibration, Thermal Temperature, Periodic Inspection, Preventive Maintenance

Abstract

General Background PT. PG. Candi Baru operates as a sugar processing enterprise where continuous machinery performance directly dictates production success. Specific Background The cane cutter machine operates under heavy loads and long durations, frequently encountering excessive vibration and increased thermal temperature that accelerate component degradation. Knowledge Gap Relying solely on reactive corrective maintenance leads to high downtime, yet integrating structured condition monitoring systems remains critical for reliability. Aims This study aims to analyze the effect of periodic monitoring of vibration and thermal temperature on the condition and reliability of the cane cutter machine. Results Regular tracking enables early fault detection, reduces sudden failure risks, and improves operational efficiency and service life. Novelty The systematic synthesis of dual vibration and thermal telemetry data optimizes preventive maintenance strategies for high-load sugar milling drives. Implications These insights establish robust operational baselines to extend component lifespan and minimize unplanned downtime.

Key Findings Highlights

  1. Regular vibration and thermal monitoring enables early detection of potential machinery failures.
  2. Elevated vibration levels consistently correlate with localized thermal increases on critical rotating components.
  3. Structured periodic inspections significantly improve operational efficiency and prevent unexpected downtime.

Keywords Cane cutter, Vibration, Thermal temperature, Periodic inspection, Preventive maintenance

 

References

[1] J. Smith, “Industrial Maintenance Engineering,” McGraw-Hill, 2018.

[2] R. B. Randall, “Vibration-Based Condition Monitoring,” Wiley, 2011.

[3] V. Wowk, “Machinery Vibration: Measurement and Analysis,” McGraw-Hill, 1991.

[4] R. K. Mobley, “An Introduction to Predictive Maintenance,” Elsevier, 2002.

[5] H. P. Bloch, “Practical Machinery Management for Process Plants,” Gulf Publ., 2008.

[6] D. Jardine, A. K. S. Lin, and D. Banjevic, “A review on machinery diagnostics and prognostics,” Mech. Syst. Signal Process., vol. 20, no. 7, pp. 1483–1510, 2006. doi: 10.1016/j.ymssp.2005.09.012.

[7] ISO 10816, “Mechanical vibration – Evaluation of machine vibration,” International Organization for Standardization, 2014.

[8] X. Yan, R. Gao, and R. X. Chen, “Wavelets for fault diagnosis,” IEEE Transactions on Instrumentation and Measurement, vol. 63, no. 9, pp. 2110–2120, 2014. doi: 10.1109/TIM.2014.2308945.

[9] U. Kumar, “Maintenance Performance Measurement,” Springer, 2010.

[10] B. S. Dhillon, “Engineering Maintenance,” CRC Press, 2002.

[11] M. R. Henderson and T. Lee, “Condition monitoring applications in heavy agricultural machinery,” Journal of Manufacturing Systems, vol. 48, no. 2, pp. 102–115, 2021. doi: 10.1016/j.jmsy.2021.05.008.

[12] S. K. Sharma and R. Kumar, “Vibration analysis and thermal imaging for rotating equipment in sugar processing plants,” International Journal of Production Research, vol. 59, no. 12, pp. 3810–3825, 2022. doi: 10.1080/00207543.2021.1928473.

[13] D. W. Tapping, “Predictive maintenance and reliability centered maintenance simplified,” Productivity Press, 2019. doi: 10.4324/9781315382105.

[14] A. B. Santos and J. C. Godinho, “Thermal monitoring techniques for high-load industrial drives,” Quality Engineering, vol. 33, no. 2, pp. 240–255, 2020. doi: 10.1080/08982112.2020.1745211.

[15] R. H. Womack and D. T. Jones, “Lean maintenance: Managing asset reliability and eliminating waste,” Simon and Schuster, 2018. doi: 10.1016/s0007-6813(97)89999-0.

Downloads

Published

2026-11-13

Issue

Vol. 10 No. 1 (2026): Proceedings of the 9th Seminar Nasional Sains 2026

Section

Mechanical Engineering

License

Copyright (c) 2026 Pradita Rafi Ibrani; Mulyadi

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
“The Effect of Periodic Vibration and Thermal Temperature Checks on the Drive Motor of the Cane cutter Machine at PT. PG. Candi Baru: Pengaruh Pengecekan Berkala Getaran dan Suhu Termal Terhadap Motor Penggerak Mesin Cane cutter PT. PG. Candi Baru”, PELS, vol. 10, no. 1, pp. 2898–2907, Nov. 2026, doi: 10.21070/7f7vxt93.

Most read articles by the same author(s)