Analysis Of Work Posture Of Packaging Division Employees In A Sugar Factory

Analisis Postur Kerja Pada Karyawan Devisi Pengemasan Di Pabrik Gula

Authors

  • Kuntu Fi Amannillah Universitas Muhammadiyah Sidoarjo
  • Hana Catur Wahyuni Universitas Muhammadiyah Sidoarjo

DOI:

https://doi.org/10.21070/07t40631

Keywords:

Work posture, RULA, REBA, Ergonomic risk, Sugar packaging

Abstract

General Background: The sugar industry holds a strategic position in fulfilling national food requirements, supported by tropical climatic conditions that facilitate sugarcane cultivation. Specific Background: Despite this vital role, packaging division operations remain heavily reliant on manual tasks, such as lifting and arranging sugar sacks, which pose substantial ergonomic hazards. Knowledge Gap: These manual procedures frequently induce musculoskeletal disorders stemming from excessive physical stress, unnatural body alignment, and inadequate postural stability. Aims: This study aims to evaluate the work posture of employees within the packaging division at Sugar Factory X utilizing the Rapid Upper Limb Assessment and Rapid Entire Body Assessment frameworks. Results: The evaluation yields a Rapid Upper Limb Assessment score of 6, indicating moderate risk, and a Rapid Entire Body Assessment score of 8, signifying high risk. Novelty: Postural angle measurements reveal trunk flexion of 19.87° alongside neck flexion of 8.58° during intensive material handling tasks. Implications: Implementing mechanical lifting aids, adjusting task rotation schedules, and conducting ergonomics training are strongly recommended to mitigate injury risks and elevate workplace safety and operational productivity.

Key Findings Highlights

  1. Rapid Upper Limb Assessment evaluations indicate a moderate risk score, while Rapid Entire Body Assessment outcomes confirm high-risk ergonomic conditions during packaging tasks.

  2. Postural evaluations reveal significant trunk and neck flexion angles driven by repetitive manual lifting and sack arrangement.

  3. Targeted interventions involving lifting aids, work rotations, and ergonomic training are essential to protect employee musculoskeletal health.

Keywords Work posture, RULA, REBA, Ergonomic risk, Sugar packaging

References

Jamaludin, R. H. T. S. Koestoer, K. Mizuno, and R. Rizal, “Tata Kelola Industri Gula untuk Pangan Berkelanjutan: Ulasan Perbandingan antara Brazil dan Indonesia,” J. Ilmu Lingkung., vol. 22, no. 2, pp. 472–483, 2024. doi: 10.14710/jil.22.2.472-483.

E. Y. Hidayat, L. Handoko, and H. N. Amrullah, “Pengukuran Dan Evaluasi Risiko Ergonomi Berdasarkan SNI 9011:2021 Serta Perancangan Ulang Stasiun Kerja Pada Proses Grinding Perusahaan Suku Cadang Otomotif,” Heal. Res. J., vol. 2, no. 3, pp. 40–50, 2025.

B. I. Putra and R. B. Jakaria, Buku Ajar Analisa dan Perancangan Sistem Kerja, 1st ed., Sidoarjo: Umsida Press, 2020.

D. A. Larassati and Y. Maghfyra, “Membangun Budaya Kerja Sehat dan Berkinerja Tinggi: Mengintegrasikan Work-life Balance dalam Manajemen Kantor Melalui Penerapan Ergonomi dan K3,” Indones. J. Public Adm. Rev., vol. 1, no. 2, pp. 1–15, 2024.

M. N. Yaqin, A. Shodiqin, and R. L. Isnaini, “Prinsip Arsitektur Ergonomi pada Bangunan Sekolah Berasrama: Studi Kasus di Al Azhar Yogyakarta World School,” J. Pendidik. dan Pembelajaran Indones., vol. 5, no. 1, pp. 41–51, 2025.

S. A. Rahma and S. B. Astuti, “Pengaruh Ergonomi pada Kantor Teknik Terhadap Produktivitas Kerja Karyawan,” J. Pengetah. Peranc. Desain Inter., vol. 13, no. 1, pp. 1–9, 2025.

F. Z. Salsabila and A. Susanty, “Penerapan Ergonomic Checklists Dalam Evaluasi Lingkungan Kerja Pada Departemen Preventive Maintenance PT Phapros Tbk,” Ind. Eng. Online J., vol. 13, no. 3, pp. 1–6, 2024.

W. Widhianingsih and H. C. Wahyuni, “Peningkatan Produktivitas Sepatu Melalui Pengendalian Persediaan Bahan Baku Dengan Metode Economic Order Quantity (EOQ) (Studi Kasus: CV Yunanda, Sidoarjo),” Ind. Inov. - J. Tek. Ind. ITN Malang, vol. 13, no. 1, pp. 32–38, 2023.

D. Harahap, I. Basriman, Sugiarto, and T. Sukwika, “Pengaruh Beban Kerja, Sikap Kerja, dan Keluhan Lowback Pain Terhadap Produktivitas Kinerja Karyawan PT. Waskita Karya,” J. Cakrawala, vol. 07, no. 1, pp. 482–494, 2024.

M. Suriya and Zuriati, Buku Ajar Asuhan Keperawatan Medikal Bedah Gangguan Pada Sistem Muskuloskeletal Aplikasi Nanda NIC & NOC, Padang: Pustaka Galeri Mandiri, 2019.

Rendisetiawan, S. Nengsi, and M. Dahlan, “Hubungan Postur Kerja Tidak Alamiah dengan Keluhan Musculoskeletal Disorders (MSDs) Petugas Kebersihan Dinas Lingkungan Hidup dan Kehutanan,” J. Peqguruang, vol. 4, no. 1, pp. 1–6, 2022.

B. Aprianto, A. F. Hidayatulloh, F. N. Zuchri, I. Seviana, and R. Amalia, “Faktor Risiko Penyebab Musculoskeletal Disorders (MSDs) Pada Pekerja: A Systematic Review,” J. Kesehat. Tambusai, vol. 2, no. 2, pp. 16–25, 2021.

N. P. Ahmad, R. Hidayat, and R. Hamdani, “Analisis Postur Kerja Dengan Metode Rula Pada Operator Las Di Bengkel Las Sumber Jaya Bekasi, Jawa Barat,” Bull. Appl. Ind. Eng. Theory, vol. 2, no. 1, pp. 59–63, 2020.

N. M. Dewantari, “Analisa Postur Kerja Menggunakan REBA Untuk Mencegah Musculoskeletal Disorder,” J. Ind. Serv., vol. 7, no. 1, pp. 4–7, 2021.

M. F. Fahmi and D. Widyaningrum, “Analisis Penilaian Postur Kerja Manual Guna Mengurangi Risiko Musculoskeletal Disorders (MSDS) Menggunakan Metode OWAS Pada UD. Anugrah Jaya,” J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 168–174, 2022.

Downloads

Published

2026-11-18

How to Cite

[1]
“Analysis Of Work Posture Of Packaging Division Employees In A Sugar Factory: Analisis Postur Kerja Pada Karyawan Devisi Pengemasan Di Pabrik Gula”, PELS, vol. 10, no. 1, pp. 3078–3094, Nov. 2026, doi: 10.21070/07t40631.