Evaluation of Crane Capacity Utilization Based on Lifting Plan in Steel Silo Assembly and Erection Works

Evaluasi Pemanfaatan Kapasitas Crane Berdasarkan Lifting Plan Pada Pekerjaan Assembly Dan Erection Silo Baja

Authors

  • Windi Hidayanti Program Studi Teknik Sipil, Fakultas Sains dan Teknologi, Universitas Muhammadiyah Sidoarjo
  • Muhammad Alvan Rizki Program Studi Teknik Sipil, Fakultas Sains dan Teknologi, Universitas Muhammadiyah Sidoarjo

DOI:

https://doi.org/10.21070/3g62r725

Keywords:

Crane capacity utilization, Lifting plan, Assembly, Erection, Steel silo, Safe working load

Abstract

General Background: Steel silo assembly and erection works involve the lifting of large and heavy components, which pose a high level of safety risk; therefore, crane capacity utilization becomes a critical aspect of construction planning. Specific Background: In field practice, crane selection is often based solely on nominal capacity without comprehensive consideration of operational factors, making a structured lifting plan essential. Knowledge Gap: Although previous studies discuss general lifting methods, comprehensive evaluations of crane capacity utilization based on actual lifting plan documents for steel silo structures remain limited. Aims: This study aims to evaluate crane capacity utilization based on lifting plan documents for steel silo assembly and erection works. Results: The evaluation indicates that during the assembly stage, the utilization of a 25-ton crane ranges from 11% to 58%, whereas during the erection stage, the utilization of a 50-ton crane ranges from 75% to 76%, remaining within acceptable safety limits. Novelty: This work introduces an empirical assessment linking lifted loads, working radii, boom lengths, and Safe Working Load (SWL) percentages across distinct assembly and erection phases. Implications: Utilizing lifting plan evaluations ensures operational safety while supporting work efficiency as a reference for heavy lifting operations in similar steel structure projects.

Key Findings Highlights

  1. Crane utilization during the assembly stage ranges between 11% and 58%, providing a sufficient safety margin.

  2. During the erection stage, crane utilization reaches 75% to 76%, approaching operational limits while remaining within safe boundaries.

  3. Evaluating crane capacity based on lifting plans successfully balances operational safety and workflow efficiency in heavy component installation.

Keywords Crane capacity utilization, Lifting plan, Assembly, Erection, Steel silo, Safe working load

References

J. S. Zhang, "Safety risk assessment of heavy lifting operations in assembly building construction," Safety Science, 2023.

R. S. McCann, Crane Safety and Risk Management in Heavy Lifting Operations, New York: McGraw-Hill, 2018.

D. D. Sukamto, A. Amarwati, and B. Karopeboka, "Analisis Pemilihan Metode Pelaksanaan Untuk Produktivitas Erection Struktur Baja Stasiun Light Rail Transit Bekasi," Jurnal Teknik Sipil dan Konstruksi, 2024.

S. Hu, Y. Fang, and Y. Bai, "Automation and optimization in crane lift planning: A critical review," Journal of Construction Engineering and Management, vol. 49, 2021.

P. Persada Trisetia Cipta, "Assembly and Erection Lifting Plan – Silo Product," PT Trisetia Cipta Persada, Pasuruan, 2025.

L. KATO Works Co., Load Chart and Technical Data KR25H-V5, Japan: KATO Works Co., Ltd., 2020.

K. C. Machinery, Load Chart T550 Rough Terrain Crane, Japan: KOBELCO Construction Machinery, 2019.

S. o. M. Engineers, "ASME B30.5: Mobile and Locomotive Cranes," ASME, New York, 2021.

K. K. R. Indonesia, "Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 8 Tahun 2020 tentang Keselamatan dan Kesehatan Kerja Pesawat Angkat dan Pesawat Angkut," Kementerian Ketenagakerjaan RI, Jakarta, 2020.

Z. Li and X. Wang, "Stability analysis of large-scale steel silos during erection process," Journal of Structural Engineering, 2022.

R. Pratama and H. Wicaksono, "Evaluasi Stabilitas Crane Berbasis Analisis Beban Dinamis Pada Proyek Konstruksi Baja," Jurnal Rekayasa Sipil, vol. 18, no. 2, pp. 110–118, 2024.

S. Hartini and N. Kadarina, "Manajemen Risiko Keselamatan Kerja Pada Pengangkatan Komponen Berat Konstruksi Terintegrasi," Jurnal Keselamatan, Kesehatan Kerja dan Lingkungan, vol. 5, no. 1, pp. 45–54, 2023.

D. A. Prasetyo and T. Ridwan, "Optimalisasi Konfigurasi Boom Dan Radius Kerja Mobile Crane Menggunakan Metode Lifting Plan," Jurnal Konstruksia, vol. 16, no. 1, pp. 60–69, 2024.

Y. A. Nugroho and R. Hartono, "Analisis Pengaruh Ground Bearing Pressure Terhadap Keamanan Operasional Crane Pada Erection Silo," Jurnal Teknik Sipil dan Perencanaan, vol. 25, no. 2, pp. 130–139, 2024.

F. X. Suparlan, Manajemen Alat Berat Dan Keselamatan Kerja Konstruksi, Jakarta: Bumi Aksara, 2021

Downloads

Published

2026-11-18

How to Cite

[1]
“Evaluation of Crane Capacity Utilization Based on Lifting Plan in Steel Silo Assembly and Erection Works: Evaluasi Pemanfaatan Kapasitas Crane Berdasarkan Lifting Plan Pada Pekerjaan Assembly Dan Erection Silo Baja”, PELS, vol. 10, no. 1, pp. 3105–3109, Nov. 2026, doi: 10.21070/3g62r725.