Productivity Measurement Analysis Using American Productivity Center and Root Cause Analysis Method
Analisa Pengukuran Produktivitas Menggunakan Metode American Productivity Center dan Metode Root Cause Analysis
-
(1) * Pungky Wulandari
Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Hana Catur Wahyuni Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
. PT Variasi Usaha Beton plant Pandaan in the mineral sector (BG) is one of the subsidiaries of PT Semen Indonesia Beton is engaged in the downstream industry of cement products. In production activities at PT Variasi Usaha Beton plant Pandaan in the mineral sector (BG) measures productivity by using the calculation of machine capacity per hour with units of tons per hour on the utility tool. With this calculation, the company only knows whether the company's production target has been achieved, but does not know the number of increases and decreases in productivity and profitability in the company. Given these problems, it is necessary to make systematic efforts through the measurement of overall productivity which consists of input costs of materials, labor, energy utilities, and capital using the American productivity center method and the root cause analysis method to determine the increase and decrease in productivity and profitability to determine actions. improvements to increase profits for the company. From the research results can be seen the value of productivity and profitability of PT Variasi Usaha Beton plant Pandaan business fluctuates up and down which is not constant. In the November period, productivity decreased in labor, raw materials, and energy inputs, while capital inputs experienced a decline in the February period. Meanwhile, the value of profitability experienced a decline in labor and capital inputs in the period of February, May, August, October, November, and December. For other month periods, it has increased. With these problems, companies need to stabilize and increase productivity by measuring, evaluating, and planning.
Downloads
References
E. Rusady and A. Alfian, “Aplikasi Metode American Productivity Center (APC) Dan Analisis Fishbone diagram Untuk Meningkatkan Produktivitas,” JTEKNO, vol. 18, no. 2, pp. 30–38, Nov. 2021, doi: 10.33557/jtekno.v18i2.1431. DOI: https://doi.org/10.33557/jtekno.v18i2.1431
P. U. S. Lestari and I. G. P. Pramana, “Desa Adat Sebagai Pelaku Usaha Pertambangan Bahan Galian Golongan C (Studi di Desa Adat Badeg),” Kertha Semaya : Journal Ilmu Hukum, vol. 8, no. 11, p. 1707, Nov. 2020, doi: 10.24843/KS.2020.v08.i11.p04. DOI: https://doi.org/10.24843/KS.2020.v08.i11.p04
S. Sukandarrumidi, Bahan Galian Industri, 1st ed. Yogyakarta: Gadjah Mada University Press, 2018.
F. Juniardi and J. S. Adiansyah, “Target Produksi Agregat Batu Andesit Hasil Crushing Plant Untuk Kebutuhan Asphalt Mixing Plant (PT Niat Karya),” Jurnal Ulul Albab, vol. 24, no. 1, pp. 60–64, Jun. 2020, doi: 10.31764/jua.v24i1.2256.
M. Zuhdi, Buku Ajar Pengantar Geologi. Nusa Tenggara Barat: Duta Pustaka Ilmu, 2019.
M. Waluyo, Produktivitas Untuk Teknik Industri, 1st ed. Sidoarjo: Dian Samudra, 2008
M. Muliadi, “Peningkatan Produktivitas Kerja Karyawan Melalui Semangat Kerja Suatu Penelitian Pada Koperasi Warga Makmur Unit Marisa Kabupaten Puhowanto,” TASAMUH: Jurnal Studi Islam, vol. 11, no. 1, pp. 87–104, 2019. DOI: https://doi.org/10.47945/tasamuh.v11i1.174
A. H. Nasution, Manajemen Industri. Yogyakarta : Andi Offset, 2006.
H. Purnomo, Pengantar Teknik Industri, 1st ed. Yogyakarta: Graha Ilmu, 2003.
D. M. R. Ristanti, Lukmandono, and R. Prabowo, “Analisis Produktivitas Dengan Pendekatan Metode APC di Perusahaan Jasa Uji Tak Merusak/NDT,” Conference on Innovation and Application of Science and Technology (CIASTECH), vol. 1, no. 1, pp. 469–477, Oct. 2018.
M. M. Manullang, “Analisis Pengukuran Produktivitas dengan Menggunakan Metode Mundel dan APC di PT X,” Jurnal Optimasi Teknik Industri (JOTI), vol. 2, no. 1, pp. 1–6, Mar. 2020, doi: 10.30998/joti.v2i1.3847. DOI: https://doi.org/10.30998/joti.v2i1.3847
M. T. Fajrin and W. Sulistiyowati, “Pengurangan Defect Pada Produk Sepatu Dengan Mengintegrasikan Statistical Process Control (SPC) dan Root Cause Analysis (RCA) Studi Kasus PT XYZ,” Spektrum Industri, vol. 16, no. 1, pp. 29–40, Apr. 2018, doi: 10.12928/si.v16i1.9778. DOI: https://doi.org/10.12928/si.v16i1.9778
N. Susendi, A. Suparman, and I. Sopyan, “Kajian Metode Root Cause Analysis yang Digunakan dalam Manajemen Risiko di Industri Farmasi,” Majalah Farmasetika, vol. 6, no. 4, pp. 310–321, May 2021, doi: 10.24198/mfarmasetika.v6i4.35053. DOI: https://doi.org/10.24198/mfarmasetika.v6i4.35053
M. R. Zakaria and I. P. Sari, “Penerapan Total Quality Management Pada Perencanaan Kaizen Kualitas Plating Di PT Surteckariya Indonesia Dengan Metode Fishbone Berbasis Android,” Jurnal Informatika SIMANTIK, vol. 4, no. 2, pp. 1–9, Sep. 2019.
C. E. Widyahening, “Penggunaan Teknik Pembelajaran Fishbone Diagram Dalam Meningkatkan Keterampilan Membaca Siswa,” Jurnal Komunikasi Pendidikan, vol. 2, no. 1, pp. 11–19, Jan. 2018, doi: 10.32585/jkp.v2i1.59. DOI: https://doi.org/10.32585/jkp.v2i1.59
Copyright (c) 2022 Pungky Wulandari, Hana Catur Wahyuni
This work is licensed under a Creative Commons Attribution 4.0 International License.
