The Effect of Alfha Angle Variation Sudu Rotor Blade On Wind Turbine Performance Using Blade NACA 0018
Pengaruh Variasi Sudut Alfa Sudu Rotor Blade Terhadap Unjuk Kerja Wind Turbine Dengan Menggunakan Blade NACA 0018
-
(1) * Habibullah
Program Studi Teknik Mesin, Fakultas Sains dan teknologi, Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Rachmad Firdaus Program Studi Teknik Mesin, Fakultas Sains dan teknologi, Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
Indonesia currently has a growing need for energy, this will experience an energy crisis condition, dependence on fossil fuels will at least pose a serious threat, therefore there must be alternative energy as a substitute and reserves such as wind energy, water energy, solar energy, and other. Because Indonesia has abundant water sources, with this my research intends to develop water as a renewable energy source that can be used as a source of energy for hydroelectric power plants or also called water turbines. The water turbine is an early generator that uses the potential energy of water to become mechanical energy where the water turns the turbine wheel. This study aims to determine the effect of the number of blades, the effect of the profile, the effect of rotor blade wing tip, Naca 0018, and the resulting energy efficiency. This research uses experimental research type.
Downloads
References
Aresti, L., Tutar, M., Chen, Y., and Calay, R. Computational study of a small scale vertical axis wind turbine (VAWT): Comparative performance of various turbulence models, Wind and Structures, Vol.17, No.6(2013), pp.647-670. DOI: https://doi.org/10.12989/was.2013.17.6.647
Fujisawa, N. and Shibuya, S., Observations of dynamic stall on Darrieus wind turbine blades, Journal of Wind Engineering and Industrial Aerodynamics, Vol.89 (2001), pp. 201–214. DOI: https://doi.org/10.1016/S0167-6105(00)00062-3
Howell, R., Qin, N., Edward, J. and Durrani, N., Wind tunnel and numerical study of a small vertical axis wind turbine, Renewable Energy, Vol.35 (2010), pp.412–422. DOI: https://doi.org/10.1016/j.renene.2009.07.025
Ross, I. and Altman, A., Wind tunnel blockage corrections: Review and application to Savonius vertical-axis wind turbines, Journal of Wind Engineering and Industrial Aerodynamics, Vol.99 (2011), pp.523–538. DOI: https://doi.org/10.1016/j.jweia.2011.02.002
Kiwata, T., Yamada, T., Kita, T., Takata, S., Komatsu, N. and Kimura, S., Performance of a vertical axis wind turbine with variable-pitch straight blades utilizing a linkage mechanism, Journal of Environment and Engineering, Vol.5, No.1 (2010), pp.213-224. DOI: https://doi.org/10.1299/jee.5.213
Larsen, J.W., Nielsen, S.R.K. and Krenk, S., Dynamic stall model for wind turbine airfoil, Journal of Fluid and Structures, Vol. 23 (2007), pp.959-982. DOI: https://doi.org/10.1016/j.jfluidstructs.2007.02.005
Leifur Leifsson, Variable-Fidelity Aerodynamic Shape Optimization, Computational Optimization, Methods and Algorithms Studies in Computational Intelligence Volume 356, 2011, pp 179-2102011 DOI: https://doi.org/10.1007/978-3-642-20859-1_9
McNaughton, J. Billard, F. and Revell, A., Turbulence modelling of low Reynolds number flow effects around a vertical axis turbine at a range of tip-speed ratios, Journal of Fluids and Structures, Vol.47 (2014), pp.124-138. DOI: https://doi.org/10.1016/j.jfluidstructs.2013.12.014
Menter F. R., Two-equation eddy-viscosity turbulence models for engineering applications, AIAA Journal, Vol.32, No.8 (1994), pp.1598–1605. DOI: https://doi.org/10.2514/3.12149
Muvariz, M. F., & Rossbandrio, W. (2015). Studi Gaya Drag dan Lift pada Blade Profile NACA 0018 Turbin Arus Laut Sumbu Vertikal. Jurnal Integrasi, 7(1), 40–44.
Rahmadi, J., Yusuf, I., & Priyatman, H. (2015). Joni rahmadi 2015. 7(1), 11–18.
Resha, M., & Yohanes, A. (2019). EFFECT OF AIRFOIL SHAPE ON THE AERODYNAMIC CHARACTERISTICS OF VERTICAL ROTOR WIND TURBINES. 9–10.
Turbin, K., Vertical, A., Profil, A., Berbantuan, B., Vane, G., Nim, S., … Indonesia, K. (n.d.). vertical axis. 1–8.
