The Procedure for Measuring Fuel Pressure on an Injection Motorbike Uses a Pressure Gauge
Prosedur Pengukuran Tekanan Bahan Bakar Pada Sepeda Motor InjProsedur pengukuran tekanan bahan bakar pada sepeda motor injeksi menggunakan pressure gaugeeksi Menggunakan Pressure Gauge
-
(1) * Diyas Robikh Arafat
Indonesia
(2) Rachmad Firdaus Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
This study aimed to design and test a fuel pump pressure tester for injection motors to measure fuel pressure and determine whether the fuel pump is working properly. The qualitative method was used in the design process, which included creating design concepts, observation, and data processing. A literature review was conducted to strengthen the research results. The functional test in the final process showed that the tool could work well and provide information in measuring fuel pressure from the fuel pump. The implication of this study is that the fuel pump pressure tester can be used to prevent engine failure and improve engine performance.
Highlight:
- Qualitative method used in the design process
- Literature review conducted to strengthen research results
- Functional test showed tool can measure fuel pressure accurately
Keywords: fuel pump pressure tester, injection motors, fuel pressure, engine failure, engine performance.
Downloads
References
A. Aryadi, "Kajian Experimental Pengaruh Variasi Tekanan Electric Fuelpump Terhadap Daya, Trosi Mesin, Emisi Gas Buang Dan Komsumsi Bahann Bakar Sepeda Motor Injeksi," J. Ilmiah Program Studi Magister Tek. Mesin, vol. 10, no. 3, pp. 55-60, 2020. DOI: https://doi.org/10.35814/teknobiz.v10i3.1764
D. Africhudin, "Pengaruh Perbedaan Tekanan Bahann Bakar Terhadap Daya Dan Efisiensi Bahan Bakar Pada Sepeda Motor Automatic 110 Fuel Injection," J. Tek. Otomotif, 2021. DOI: https://doi.org/10.17977/um074v5i22021p19-24
L. Romdhoni, "Pengaruh Variabel Tekanan Fuel Pump Terhadap Performa Mesin Motor Astro 108 cc Yang Bersistem Injeksi Dengan Bahan Bakar Pertamax Dan Ethanol," 2021.
Paridawati, "Jurnal Otomotif Optimasi Motor Bahan Bakar Sistem Injeksi Menggunakan Metode Simulasi Artifial Neural Network," 2014.
A. A. Arifin, "Pengaruh Kenaikan Tekanan Fuel Pump Terhadap Performa Sepeda Motor Honda Beat FI 110cc," Ph.D. dissertation, Univ. Muhammadiyah Ponorogo, 2023.
H. Nasrullah and R. Saputra, "Rancang Bangun Fuel Pump Pressure Tester Pada Motor Injeksi," J. E-Komtek, vol. 3, no. 1, pp. 13-21, 2019. DOI: https://doi.org/10.37339/e-komtek.v3i1.127
H. G. Setyawan, "Pengaruh Kenaikan Tekanan Pompa Bahan Bakar Terhadap Performa Sepeda Motor Honda 125cc Injeksi Menggunakan Pompa Bahan Bakar Pneumatik," Ph.D. dissertation, Univ. Negeri Jakarta, 2017.
A. Muliawan, M. D. A. Ramadhan, and Y. H. Anoi, "Variasi Tegangan Pompa Terhadap Kinerja Mesin Sepeda Motor Honda Scoopy," JST (J. Sains Terapan), vol. 8, no. 2, pp. 16-21, 2022.
I. Setiawan, "Analisis Perbandingan Tekanan Tipe Pompa Bahan Bakar Injeksi Dan Tipe Bahan Bakar Mekanik," Teknosains: J. Sains, Teknol. dan Informatika, vol. 8, no. 1, pp. 32-38, 2021.
I. Setiawan, "Analisis Perbandingan Tekanan Tipe Pompa Bahan Bakar Injeksi Dan Tipe Bahan Bakar Mekanik," Teknosains: J. Sains, Teknol. dan Informatika, vol. 8, no. 1, pp. 32-38, 2021. DOI: https://doi.org/10.37373/tekno.v8i1.73
Copyright (c) 2024 Diyas Robikh Arafat, Rachmad Firdaus
This work is licensed under a Creative Commons Attribution 4.0 International License.
