Implementation of Quality Filter Mapping (QFM) in Hot Press Using Lean Manufacturing To Eliminate Waste
Implementasi Quality Filter Mapping (QFM) Bagian Hot Press Menggunakan Lean Manufacturing Untuk Mengeliminasi Waste
-
(1) * Muhamad Yasin
Institut Teknologi Adhi Tama Surabaya
Indonesia
(2) Lukmandono Institut Teknologi Adhi Tama Surabaya
Indonesia
(*) Corresponding Author
Abstract
PT Sakari Sumber Abadi is a manufacturing company that is engaged in producing plywood products as its main product. This company has waste in the production line, namely in the 4.6 mm Birch product, including shrinkage putty, press mark, tip delemination, bubbles, ripping. Whereas for 18 mm Birch products, among others, press marks, putty shrinkage, concave, overlap, putty face too wide, ripping, waste in the face and delamination of the ends. What you want to achieve in this research is to eliminate the waste of 4.6 mm Birch Products and 18 mm Birch Products found in the Hot Press section in order to fulfill customer demand with the Lean Manufacturing approach. Lean Manufacturing is a systematic approach that eliminates waste and transforms processes. The results of the inspection using the Quality Filter Mapping (QFM) method obtained the largest waste in the Birch 4.6 mm Face 0.5 mm product, namely Failure to Riject by 0.82% and on Birch 18 mm Face 0.28 mm product, namely Failure to Riject by 7.1%. Recommendations for improvement include standard parameters of temperature, press time and pressure.
Downloads
References
Gasperz, V., & Fontana, A. Lean Six Sigma for Manufacturing and Service Industries. Bogor: Vinchristo Publication, (2011).
Khanan, M.S.A., Haryono., ”Menghilangkan Pemborosan di Lini Produksi PT Adi Satria Abadi Dengan Analisa Penerapan Lean Manufacturing”, Jurnal Rekayasa Sistem Industri Vol. 4, No. 1, (2015).
Farah, W.H., Putu, D.K., Hari S., 2012 “Penerapan Lean Manufacturing Untuk Mereduksi waste di PT ARISU” , JURNAL TEKNIK ITS Vol. 1, No. 1 (Sept. 2012) ISSN: 2301-9271.
Alaca, H., & Ceylan, C. Value Chain Analysis the use of Value Stream Mapping : Industrial Engineering of White Good Industry Application Department (p. 6). Kuala Lumpur: International Conference on Operations Management and Industrial Engineering, (2011).
Sabta Adi, Kusuma. Penerapan Lean Manufacturing Dalam Meminimasi & Mengidentifikasi Waste Di PT. Hilton Surabaya. Undergraduate Thesis. UPN Jatim: Surabaya, (2010).
Christopher Wright. (2017). Buku : Fundamentals of Assurance for Lean Project, IT Governance Ltd, 2 Mar 2017 – 156 halaman.
Daonil. (2012).Tesis : Mengeliminasi Waste di Lini Produksi Machining Cast Wheel Menggunakan Metode Wam Dan Valsat Untuk Implementasi Pada Lean Manufacturing, Tahun 2012, Depok :Fakultas Teknik Program Studi Teknik Industri Universitas Indonesia.
Raihanah Yusuf. Increasing Production Results at PT. Kati Kartika Murni for Planning Carton Box Production Process Improvement with Lean Manufacturing Approach. Jurnal Teknik Industri (2020) ISSN 2622-5131 (Online) Vol. 9 No. 3 ISSN 1411-6340 (Print).
Ahmed Jaffar. Management of seven wastes: A case study in an automotive vendor. Article in Jurnal Teknologi · September 2015 DOI: 10.11113/jt.v76.5668.
Lukmandono. Minimasi Masa Penggantian Cetakan Dengan Pendekatan Singel Minute Exchange of Dies (SMED) & Lean Manufacture. FT UMS ISSN 1412-9612, Simposium Nasional RAPI XVII (2018)
Almer Panji Pradana. Implementasi Konsep Lean Manufacturing Guna Megurangi Pemborosan di Lantai Produksi, ISSN 1693-2102 http : // jurnal.upnyk.ac.id / index.php / opsi, Jurnal OPSI Vol 11 No.1 (2018).
Trismi Ristyowati. Konsep Lean Manufacturing Dengan Minimasi Waste Pada Aktivitas Proses Produksi (Studi Kasus di PT. Sport Glove Indonesia). Jurnal OPSI Volume 10 Nomer 1 Juni 2017 ISSN 1693-2102.
Danang Triagus Setiyawan. Perbaikan Proses Produksi Kantong Kemasan Dengan Pendekatan Lean Manufacturing untuk Minimasi Waste. Journal of Engineering and Management in Industrial System · July 2013 DOI: 10.21776/ub.jemis.2013.001.01.2.
Lukmandono. Implementation Lean Manufacturing Concept of Waste Reduction at Operational Division. The 1st International Conference on Technology IOP Conf and Advanced Engineering. Series: Engineering and Materials Science 462 (2019) 012049 IOP Publishing doi : 10.1088/1757-899X/462/1/012049.
Putri Citra Marifa. Waste assessment model in a hand written batik industry and Production waste analysis using value stream mapping. MATEC Web of Conferences 154, 01076 (2018), https://doi.org/10.1051/matecconf/201815401076.
