Three Phase Induction Motor Control Using Programmable Logic Control With Star Method Kendali Motor Induksi Tiga Fasa Menggunakan Programmable Logic Controller Dengan Metode Star

Main Article Content

Haris Mastain Arzaq

Abstract

The rapid development of automation system is inseparable from the development of technology in the field of control. In its development, a Programmable Logic Controller (PLC) has been widely used on an industrial scale. PLC programmable can be used as a controller of three phase induction motor. If an error occurs, it can be quickly identified and the work function of each device can be monitored and will also be easier to develop a method of control in the industry. This situation led to many large industries using PLC for all control equipment. In this study created a system of control of three phase induction motor using Programmable Logic Controller (PLC) with the method of Star (Y). Inrush current when the displacement of the position of Star (Y) to Delta (Δ) is expected to be reduced. The results of the research that has been done the tool can work well and yield value in accordance with the theory. As well as a tool in the design of specialized trainer so it can be used as a learning media.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
Haris Mastain Arzaq, “Three Phase Induction Motor Control Using Programmable Logic Control With Star Method”, PELS, vol. 1, no. 1, Mar. 2021.
Section
Electrical Engineering

References

[1] M. T. S. Adlio Dwismara E, Geral Junio R, “KONTROL KECEPATAN MOTOR INDUKSI TIGA FASA MELALUI ARUS ROTOR MENGGUNAKAN PI,” J. Tek. ELEKTRO DAN Komput. TRIAC, vol. 7, no. 2, 2020.
[2] N. Evalina and A. A. Zulfikar, “Pengaturan Kecepatan Putaran Motor Induksi 3 Fasa Menggunakan Programmable Logic Controller,” J. Electr. Technol., vol. 3, no. 2, pp. 73–80, 2018.
[3] E. Susanto, “Automatic Transfer Switch (Suatu Tinjauan),” J. Tek. Elektro Unnes, vol. 5, no. 1, pp. 3–6, 2013, doi: 10.15294/jte.v5i1.3549.
[4] I. M. A. N. Sultan, Agung Budi Muljono, “Visualisasi Pengasutan Motor Induksi Tiga Fase Berbasis Programmable Logic Control,” vol. 4, no. 1, pp. 58–69, 2017.
[5] I. Journal, F. Technological, A. P. Shinde, K. S. Shendge, and R. K. More, “Plc Automation of Star Delta Starter for Using Induction Motor,” vol. 4, no. 9, pp. 1673–1677, 2017.
[6] A. Elbani, “Implementasi Pengendali PLC Pada Sistem Motor Tiga Phasa Untuk Star Y/Δ,” Elkha, vol. 3, no. 1, pp. 18–23, 2011.
[7] H. Istiqlaliyah, “Analisis Pengaruh Penggunaan Sistem Star Delta Dengan Rangkaian Manual Dan Plc Pada Motor Listrik 3 Phasa,” Al Jazari J. Mech. Eng., vol. 2, no. 2, pp. 16–21, 2017.
[8] S. Kharait and P. S. Phulambrikar, “Implementation of PLC Based Star Delta Starter for Starting and Direction Control Of Three Phase Induction Motor,” vol. 2, no. 11, pp. 2881–2886, 2013.
[9] D. Yuhendri, “Penggunaan PLC Sebagai Pengontrol Peralatan Building Automatis,” J. Electr. Technol., vol. 3, no. 3, pp. 121–127, 2018.