Pressure And Power Monitoring For Scada System At PT. IS

Pengamatan Tekanan Dan Alat Ukur Tenaga Untuk Sistem Scada Di PT IS

Authors

  • Mohammad Shalahudin Annuri Universitas Muhammadiyah Sidoarjo
  • Akhmad Ahfas Universitas Muhammadiyah Sidoarjo

DOI:

https://doi.org/10.21070/pels.v10i1.2913

Keywords:

Monitoring, Pressure and power meter, SCADA system, Industrial automation, Wireless communication

Abstract

General Background Industrial automation systems heavily rely on Supervisory Control and Data Acquisition (SCADA) frameworks to ensure efficient and continuous manufacturing operations. Specific Background Real-time monitoring of pressure parameters and electrical power metrics across outdoor air conditioning units and industrial equipment requires precise instrumentation data transmission. Knowledge Gap Existing monitoring configurations often lack comprehensive real-time wireless integration linking distributed field sensors with centralized HMI and database archiving systems. Aims This study examines the implementation and synchronization of pressure sensors and power meters within a SCADA-based monitoring framework using Modbus protocols and industrial wireless communication. Results Field testing demonstrates that integrating pressure sensors, power meters, Moxa remote I/O modules, and wireless clients enables accurate, stable real-time data acquisition and structured logging without communication delays. Novelty A robust wireless SCADA telemetry framework optimized for concurrent pressure and electrical power supervision in industrial environments. Implications Implementing wireless SCADA monitoring architectures significantly enhances operational efficiency, reduces installation complexity, and supports preventive maintenance strategies in modern industrial facilities.

Key Findings Highlights

  1. Real-time telemetry protocols successfully transmit pressure and power meter metrics to centralized SCADA interfaces.

  2. Industrial wireless clients eliminate complex cabling constraints while maintaining high data transmission reliability.

  3. Structured data logging mechanisms streamline energy auditing and operational performance evaluations.

Keywords Monitoring, Pressure and power meter, SCADA system, Industrial automation, Wireless communication

Downloads

Download data is not yet available.

References

[1] H. Gunawan, Industri 4.0 dan Tantangan Sumber Daya Manusia, Bandung: Remaja Rosdakarya, 2022.

[2] Ridwan, "Rancang Bangun Sistem Monitoring dan Pengaturan Beban pada Laboratorium Menggunakan Programmable Logic Controller Berbasis SCADA," Skripsi, Universitas Lancang Kuning, Pekanbaru, 2022.

[3] N. Fadilah, Sistem Instrumentasi dan Kontrol Industri, Yogyakarta: Graha Ilmu, 2020.

[4] D. Suryadi, Otomasi Industri: Konsep, Teknologi, dan Implementasi, Jakarta: Andi, 2021.

[5] A. Ismail, "Sistem Monitoring dan Kontrol Tekanan Menggunakan Pressure Sensor Berbasis PLC," Jurnal Teknologi Elektro Universitas Muhammadiyah Surakarta, vol. 9, no. 2, pp. 45–53, 2021.

[6] D. Febrianto, "Sistem Monitoring Power Meter Antara HMI dengan Database Server pada Pabrik Gula," Jurnal 7 Samudra Politeknik, vol. 6, no. 1, pp. 10–18, 2021.

[7] AirWorks AWK-1137C User’s Manual, ver. 4.0, Moxa Inc., May 2019. [Online]. Available: https://www.moxa.com/Moxa/media/PDIM/S100000315/moxa-awk-1137c-series-manual-v4.0.pdf

[8] S. Yahya, "Purwarupa SCADA PLTMH Menggunakan Komunikasi Modem GSM Berbasis PLC," in National Conference of Applied Sciences, Engineering, 2016.

[9] ioLogik E1200 Series Datasheet, ver. 2.4, Moxa Inc.. [Online]. Available: https://shopmoxa.neteon.net/content/pdf/moxa-iologik-e1200-series-datasheet-v2.4.pdf

[10] P. D, "Implementasi HMI Berbasis Wonderware Intouch untuk Sistem Kontrol Produksi," Jurnal Teknologi Elektro, vol. 2, no. 12, pp. 55–63, 2021.

[11] T. Wibowo and R. Santoso, "Optimalisasi sistem SCADA nirkabel untuk pemantauan parameter lingkungan industri," Jurnal Rekayasa Elektrika, vol. 19, no. 1, pp. 22–30, 2023.

[12] E. S. Susanto and B. P. Pratama, "Analisis keandalan komunikasi Modbus TCP pada jaringan industri berbasis Ethernet," Jurnal Teknologi dan Sistem Komputer, vol. 11, no. 2, pp. 115–123, 2023.

[13] N. L. Fitriani and A. S. Wijaya, "Penerapan sistem akuisisi data real-time untuk efisiensi energi pabrik," Jurnal Energi Elektrik, vol. 12, no. 1, pp. 45–54, 2024.

[14] K. A. Kurniawan and M. R. Utomo, "Evaluasi performa wireless client pada lingkungan pabrik berinterferensi tinggi," Jurnal Telekomunikasi dan Komputer, vol. 14, no. 2, pp. 88–97, 2024.

[15] M. R. Alfianto and D. Prasetyo, "Integrasi HMI dan database server untuk audit energi industri," Jurnal Automasi dan Kontrol, vol. 5, no. 1, pp. 33–41, 2025.

Downloads

Published

2026-10-17

Issue

Vol. 10 No. 1 (2026): Proceedings of the 9th Seminar Nasional Sains 2026

Section

Electrical Engineering

Categories

License

Copyright (c) 2026 Mohammad Shalahudin Annuri, Akhmad Ahfas

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
“Pressure And Power Monitoring For Scada System At PT. IS: Pengamatan Tekanan Dan Alat Ukur Tenaga Untuk Sistem Scada Di PT IS”, PELS, vol. 10, no. 1, pp. 770–777, Oct. 2026, doi: 10.21070/pels.v10i1.2913.

Most read articles by the same author(s)