Hollow Bar Manufacturing Process Using a Conventional Lathe

Proses Pembuatan Hollow bar Menggunakan Mesin Bubut Konvensional

Authors

  • Daffa Adhi Sunata Universitas Muhammadiyah Sidoarjo
  • Iswanto Universitas Muhammadiyah Sidoarjo

DOI:

https://doi.org/10.21070/s5pwhq56

Keywords:

Conventional lathe machine, Hollow bar, Turning, Boring, Manufacturing process

Abstract

General Background: The turning process represents a fundamental machining operation widely applied in the manufacturing industry to produce cylindrical components. Specific Background: Hollow bar manufacturing using conventional lathe machines requires precise sequential steps ranging from material preparation to internal boring and final inspection. Knowledge Gap: Existing industrial reports frequently lack detailed operational parameter analyses and structured documentation regarding dimensional tolerances during conventional hollow bar production. Aims: This study aims to identify and understand the production stages involved in manufacturing a hollow bar using a conventional lathe machine. Results: The applied turning procedures successfully fabricated hollow bars within the specified dimensional tolerances of plus or minus zero point one millimeters while maintaining proper surface finish. Novelty: This work provides an exhaustive practical breakdown of sequential conventional lathe operations specifically tailored for low-carbon steel hollow component fabrication. Implications: Implementing standardized turning procedures, proper tool selection, and safety protocols optimizes manufacturing efficiency and provides practical training insights for industrial engineering students.

Key Findings Highlights

  1. Demonstrating that conventional lathe machines can effectively manufacture low-carbon steel hollow bars within strict dimensional tolerances of plus or minus zero point one millimeters,

  2. Establishing a systematic sequential workflow covering facing, outer diameter turning, drilling, boring, chamfering, and finishing operations,

  3. Identifying and overcoming machining challenges such as internal boring vibrations and concentricity maintenance through gradual cutting depths and precise tool adjustments.

Keywords Conventional lathe machine, Hollow bar, Turning, Boring, Manufacturing process

References

Z. Arifin and A. Pratama, “Analisis Pengaruh Parameter Pemotongan Terhadap Kekasaran Permukaan Hasil Pembubutan Baja Karbon,” Jurnal Teknik Mesin, vol. 8, no. 2, pp. 45–52, 2019.

S. Nugroho and R. Hidayat, “Studi Proses Pembubutan Menggunakan Mesin Bubut Konvensional Pada Baja Karbon Rendah,” Jurnal Rekayasa Mesin, vol. 11, no. 1, pp. 23–30, 2020.

B. Santoso and D. Kurniawan, “Pengaruh Kecepatan Potong Dan Gerak Makan Terhadap Kualitas Permukaan Hasil Pembubutan,” Jurnal Ilmiah Teknik Industri, vol. 17, no. 2, pp. 89–96, 2018.

E. Prasetyo and A. Wibowo, “Analisis Proses Boring Pada Pembuatan Komponen Silindris Berongga,” Jurnal Teknik Manufaktur, vol. 5, no. 1, pp. 1–8, 2021.

S. Kalpakjian and S. R. Schmid, Manufacturing Processes for Engineering Materials. Pearson Education, 2014.

E. M. Trent and P. K. Wright, Metal Cutting. Butterworth-Heinemann, 2000.

M. P. Groover, Fundamentals of Modern Manufacturing: Materials, Processes, and Systems. John Wiley & Sons, 2010.

B. H. Amstead, P. F. Ostwald, and M. L. Begeman, Manufacturing Processes. John Wiley & Sons, 1987.

J. A. Schey, Introduction to Manufacturing Processes. McGraw-Hill, 2000.

R. B. Jakaria and Tedjo Sukmono, Buku Ajar Mata Kuliah Perencanaan Dan Perancangan Produk. Umsida Press, 2021, doi: 10.21070/2021/978-623-6292-41-9.

Iswanto, “Analisa Pengaruh Sudut Pahat dan Gerak Makan Terhadap Keausan Pahat pada Proses Bubut,” Jurnal Teknologi Permesinan, 2019.

M. R. Reddy, “Effect Of Feed Rate On the Generation Of Surface Roughness In Turning,” Int. J. Eng. Sci. Technol., vol. 3, no. 11, pp. 8099–8105, 2011.

D. A. Stephenson and J. S. Agapiou, Metal Cutting Theory and Practice, 3rd ed. CRC Press, 2016.

J. P. Davim, Machining Fundamentals and Recent Advances. Springer, 2008.

F. Klocke, Manufacturing Processes 1: Cutting. Springer, 2011.

Downloads

Published

2026-11-18

How to Cite

[1]
“Hollow Bar Manufacturing Process Using a Conventional Lathe: Proses Pembuatan Hollow bar Menggunakan Mesin Bubut Konvensional”, PELS, vol. 10, no. 1, pp. 3200–3206, Nov. 2026, doi: 10.21070/s5pwhq56.