Identifying the Risk of Failure of the Sock Production Process Using the FMEA Method
Identifikasi Risiko Kegagalan Proses Produksi Kaos Kaki Menggunakan Metode FMEA
DOI:
https://doi.org/10.21070/hy0j0b09Keywords:
risk of failure, FMEA, SocksAbstract
CV Putra Delta is a company that produces all kinds of school attributes, one of which is socks. The average production per month reaches 30 thousand pcs, but also the risk of defects that reach 3000 pcs. The risk of failure during the production process includes design errors, socks that are not neat and still have holes, to obras that are not locked. This study aims to determine the highest risk of failure that occurs in the sock production process and its risk mitigation. The method used is Failure Mode Effect Analysis (FMEA). The results obtained are the highest risk of failure of the socks that are not fully knitted with an RPN value of 85. The recommended risk mitigation is the need to make a machine warm up schedule before use and the importance of improving operator skills
References
A. S. Milah and Suseno, “Analisis pengendalian kualitas produk EQ spacing dengan metode Statistical Quality Control (SQC) dan Failure Mode and Effects Analysis (FMEA) pada PT. Sinar Semesta,” Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), vol. 1, no. 3, pp. 183–201, 2022.
D. A. Walujo, T. Koesdijanti, and Y. Utomo, Pengendalian Kualitas. Surabaya, Indonesia: Scopindo Media Pustaka, 2020.
I. Marodiyah, A. S. Cahyana, and I. R. Nurmalasari, “Integrasi metode QRM dan FMEA dalam manajemen risiko petani tebu,” Jurnal Produktiva, vol. 2, no. 3, pp. 1–5, 2022.
F. R. P. Nasution and I. N. Nasution, “Identifikasi risiko kegagalan proses produksi toilet soap plant (sabun mandi padat) di PT. XYZ dengan menggunakan metode Failure Modes and Effects Analysis (FMEA),” Jurnal Manajemen Rekayasa dan Inovasi Bisnis, vol. 1, no. 1, pp. 45–59, 2023.
I. Marodiyah, A. S. Cahyana, and I. R. Nurmalasari, “Integrasi metode QRM dan FMEA dalam manajemen risiko petani tebu,” Jurnal Produktiva, vol. 2, no. 3, pp. 1–5, 2022.
T. Elvina and A. R. Dwicahyani, “Pengendalian kualitas menggunakan metode Lean Six Sigma dan FMEA untuk mengurangi produk cacat panci anodize PT. ABC,” in Prosiding Seminar Nasional Teknologi Industri Berkelanjutan II (SENASTITAN II), vol. 2, pp. 294–304, 2022.
B. Khrisdamara and D. Andesta, “Analisis penyebab kerusakan head truck-B44 menggunakan metode FMEA dan FTA (studi kasus: PT. Bima, Site Pelabuhan Berlian),” Jurnal Serambi Engineering, vol. 7, no. 3, pp. 3303–3313, Jul. 2022, doi: 10.32672/jse.v7i3.4255.
A. Lestari and N. A. Mahbubah, “Analisis defect proses produksi songkok berbasis metode FMEA dan FTA di home-industri Songkok GSA Lamongan,” Jurnal Serambi Engineering, vol. 6, no. 3, 2021, doi: 10.32672/jse.v6i3.3254.
F. R. Supoyo and R. A. Darajatun, “Analisis pengendalian kualitas untuk mengurangi defect parking brake dengan metode FMEA di PT. XYZ,” Jurnal Serambi Engineering, vol. 8, no. 1, pp. 4438–4444, 2023.
T. Zakaria and A. D. Juniarti, “Analisis pengendalian kualitas cacat dimensi pada header boiler menggunakan metode FMEA dan FTA,” Jurnal InTent, vol. 6, no. 1, pp. 24–36, 2023.
S. Abu Dabous, F. Ibrahim, S. Feroz, and I. Alsyouf, “Integration of failure mode, effects, and criticality analysis with multi-criteria decision-making in engineering applications: Part I – Manufacturing industry,” Engineering Failure Analysis, vol. 122, Art. no. 105264, 2021, doi: 10.1016/j.engfailanal.2021.105264.
“Application of Lean Six Sigma framework for improving manufacturing efficiency: A case study in Indian context,” International Journal of Productivity and Performance Management, vol. 71, no. 5, pp. 1561–1589, 2022, doi: 10.1108/IJPPM-05-2020-0223.
“Defect reduction using DMAIC and Lean Six Sigma: A case study in a manufacturing car parts supplier,” International Journal of Quality & Reliability Management, vol. 40, no. 9, pp. 2184–2204, 2023, doi: 10.1108/IJQRM-05-2022-0157.
M. Sholihah and R. Hidayat, “Analisis dan pengelolaan risiko pada proses produksi panel listrik menggunakan pendekatan Failure Mode and Effects Analysis dan Fault Tree Analysis,” J@ti Undip: Jurnal Teknik Industri, vol. 20, no. 2, pp. 155–167, Jun. 2025, doi: 10.14710/jati.20.2.155-167.
S. Pungchompoo, N. Sirivongpaisal, R. Duansoithong, and A. Teeraparbseree, “Designing and developing quality control of processes using the Failure Mode and Effects Analysis method and machine learning,” ASEAN Journal of Scientific and Technological Reports, vol. 28, no. 6, 2025, doi: 10.55164/ajstr.v28i6.259345.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Afif Hidayat, Indah Apriliana Sari Wulandari
This work is licensed under a Creative Commons Attribution 4.0 International License.
