Risk Mitigation Strategy In Chicken Distribution System Integration Methodsix Sigma, Root Cause Analysis Dan Swot
Re-Layout Fasilitas Produksi Menggunakan Metode Systamatic Layout Planning Dan Blockplan Untuk Mengoptimalkan Total Momen Material Handling
-
(1) * Mochammad Rizal
Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Wiwik Sumarmi Universitas Muhammadiyah Sidoarjo
Indonesia
(3) Ribangun Bambang Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
PT. Behaestex Pandaan is a textile company engaged in the manufacture of Muslim clothing, especially woven sarongs. Weaving sarongs made with ATBM (Not Machine Weaving Equipment) provide the best quality. On the other hand PT. Behaestex Pandaan has provided the best quality but lacks efficiency in terms of factory layout. This research seeks to help make a design proposal for the placement of work stations in order to aim at minimizing the total moment and distance of material transfer due to the condition of the work station having a total moment and distance of movement that is less effective and efficient. This study uses the method of Systematic Layout Planning (SLP) and Blockplan. There are alternative layouts that are possible and then selected to determine the most effective alternative based on the lowest total moment and material displacement distance. In the Systematic Layout Planning (SLP) and Blockplan methods there will be a comparison that can determine the effectiveness of the 2 methods. The Systematic Layout Planning (SLP) method has more granular factors such as workflow and qualitative considerations, while Blockplan is automated only considers a few factors regardless of the current workflow. From the results of this study can find solutions to the problems experienced by PT. Behaestex Pandaan about the proposed layout by comparing the results of the SLP and Blockplan methods so that it can find out the total moment and and distance of material transfer which is more effective and efficient at PT. Behaestex Pandaan.
Downloads
References
Abdurrahman, Muhammad Milzam dkk, (2021). “ Rancang Ulang Tata Letak Fasilitas Produksi untuk Efisiensi Produksi Kopi di PT Sinar Mayang Lestari Menggunakan Metode Systematic Layout Planning dan Software Blocplan ”. Jurnal Agrikultura. Vol. 32, No. 2. Hal. 146-157.
Akhmad, Sabarudin, (2020). “ Perancangan Desain Layout Pabrik ”. Media Nusa Creative Hal. 130.
Alamsyah, Andy Dwiky dkk, (2021). “ Usulan Rancangan Tata Letak Fasilitas Proses Replating Kapal dengan Menggunakan Metode ARC dan ARD (Studi Kasus di Sbu Galangan Pelni Surya) ”. Seminar Nasional Teknologi Industri Berkelanjutan. Vol. 8, No. 3. Hal. 65-71.
Albana, Tareq, (2020). “ Catatan Seputar Mesir dan Keunikannya ”. CV. Diandra Primamitra Media. Hal. 33-34.
Arif, Muhammad, (2017). “ Perancangan Tata Letak Pabrik ”. CV Budi Utama. Hal. 2-98.
Camerawati, Febriani Lenshi dkk, (2021). “ Perancangan Ulang Tata Letak Fasilitas Gudang Bahan Baku Dengan Metode Systematic Layout Planning (Slp) Di Pt. Inka Multi Solusi ”. Juminten: Jurnal Manajemen Industri dan Teknologi. Vol. 2, No. 3. Hal. 59-70.
Hartari, Elfania, (2021). “ Perancangan Tata Letak Stasiun Kerja dengan Menggunakan Metode Systematic Layout Planning ”. Jurnal Media Teknik & Sistem Industri. Vol. 5, No. 2. Hal. 118-125.
Lestari, Merah Delima Asih Bening, (2018). “ Perancangan Sarung Majalaya Untuk Busanaready To Wear ”. e-Proceeding of Art & Design. Vol.5, No.3. Hal. 3015-3036.
Mayasari, Rizka dkk, (2017). “ Perencanaan Tata Letak Fasilitas Di Pabrik Tahu Pong Enggal Jaya Palembang ”. Jurnal Integrasi. Vol. 2, No. 2. Hal. 35-41.
Nurdiansyah, Chepi, (2018). “ Pengaruh Ekuitas Merek Dan Rasa Percaya Diri Konsumen Terhadap Keputusan Pembelian Sarung BHS (Studi Kasus pada Toko AL- Bagdadi) ”. e-Journal. Vol. 9, No. 1. Hal. 135-141.
Pattiapon, Marcy L dkk, (2021). “ Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Menggunakan Metode Algoritma Blocplanguna Meminimasi Ongkos Material Handling ”. Vol. 15, No. 2. Hal. 104-114.
Permata, Ekie Gilang dkk, (2016). “ Perancang Ulang Tata Letak Pabrik dengan Membandingkan Metode Grafik dan Computerized Relative Allocation of Facilities Technique (Craft) untuk Meminimasi Ongkos Material Handling di PT. Perindustrian dan Perdagangan Bangkinang ”. Jurnal Teknik Industri. Vol. 2, No. 2. Hal. 121-127.
Rantung, Arsinta Maisssy dkk, (2018). “ Usulan Perbaikan Tata Letak Lantai Produksi PT. Porter Rekayasa Unggul untuk Meminimasi Biaya Material Handling dan Waktu Produksi dengan Metode Pairwise Exchange dan Simulasi ”. Jurnal Teknik Industri. Vol. 8, No. 2. Hal. 145-158.
Rosyidi, Moh Ririn, (2018). “ Analisa Tata Letak Fasilitas Produksi Dengan Metode Arc, Ard, Dan Aad Di Pt. Xyz ”. Jurnal Teknik Waktu. Vol. 16, No. 1. Hal. 82-95.
Safitri, Nadia Dini dkk, (2017). “ Analisis perancangan tataletak fasilitas produksi menggunakan metode activity relationship chart (ARC) ”. Jurnal Manajemen. Vol. 9, No. 1. Hal. 38-47.
Sibuea, Selamat dkk, (2020). “ Relayout Gudang Produk Jadi Pt. Jaya Beton Indonesia Menggunakan Metode Systematic Layout Planning Dan Corelap ”. Juriti Prima. Vol. 3, No. 2. Hal. 7-14.
Simanjutak, Risma Adelina dkk, (2021). “ Usulan Perbaikan Tata Letak Fasilitas Produksi Di Pt. Xyz ”. Prosiding Seminar Nasional Aplikasi Sains dan Teknologi. Vol. 20, No. 3. Hal. 93-100.
Sugiarto, Toto, (2021). “ Makna Material Culture dalam “Sarung” sebagai Identitas Santri ”. El-Madani Jurnal Dakwah dan Komunikasi Islam. Vol. 2, No. 1. Hal. 77-100.
Copyright (c) 2023 Mochammad Rizal, Wiwik Sumarmi, Ribangun Bambang
This work is licensed under a Creative Commons Attribution 4.0 International License.
