Penggunaan Mesin Press Manual sebagai Alat Bantu Produksi di Bengkel Mekanik
The Use of Manual Press Machine as a Production Tool in a Mechanical Workshop
DOI:
https://doi.org/10.21070/pels.v10i1.3063Keywords:
Needle-Based Press Machine, High Precision, Material Pressing, Machine Design, Force DistributionAbstract
General Background Modern manufacturing industries, including micro-component production and precision crafts, increasingly demand high-accuracy material processing to ensure output quality. Specific Background Conventional mechanical, hydraulic, and pneumatic press machines struggle to deliver precise localized force on small work areas without damaging surrounding surfaces. Knowledge Gap Existing manual pressing systems lack targeted pressure distribution mechanisms, leading to material deformation and high defect rates in small-scale workshops. Aims This study designs, fabricates, and evaluates a manual needle-based press machine engineered to concentrate pressing force on specific micro-point locations with high accuracy. Results Experimental evaluation on thin plastic, light sheet metals, and composite materials demonstrates that the system concentrates force effectively, minimizes material distortion, maintains operational stability, and reduces material waste. Novelty The integration of a high-precision needle point mechanism into a manual pressing structure provides a cost-effective, high-accuracy alternative to conventional press equipment. Implications This mechanism offers small to medium-scale manufacturing workshops a viable solution for improving product consistency and detail execution in micro-manufacturing applications.
Key Findings Highlights
Concentrated Force Mechanics
Micro-Point Pressing Accuracy
Reduced Deformation Performance
Keywords Needle-Based Press Machine, High Precision, Material Pressing, Machine Design, Force Distribution
Downloads
References
M. A. Suyuti, R. Nur, and M. Iswar, "Rancang bangun press tool untuk alat bending pelat tipe die-v air bending," Jurnal Teknik Mesin, vol. 6, no. 1, pp. 39–45, 2020.
P. S. T. Industri, F. T. U. Widyatama, "Analisis kecacatan pada produk pakaian jadi menggunakan metode eight disciplines (8D) di konveksi XYZ," Jurnal Teknik Industri Widyatama, vol. 8, no. 2, pp. 116–131, 2025.
W. Wu, "Design and analysis of flat washer stamping compound mold," Advances in Computer Science Research, vol. 83, pp. 386–389, 2018.
B. Noormalasari, "Penerapan kendaraan listrik dengan roda mecanum berbasis ESP32 dengan kendali Android di PT Racer Robotic," Laporan Magang, Universitas Islam Balitar, Blitar, Indonesia, 2025.
Wisaksono, H. Marwan, and R. Alogo, Dasar-Dasar Air Conditioner (AC) Split. Sidoarjo, Indonesia: UMSIDA Press, 2024.
J. T. M. F. T. I. U. I. Indonesia, "Perancangan mesin press backer atas untuk meningkatkan efisiensi proses dan kualitas hasil press backer atas di PT Yamaha Indonesia," Jurnal Keilmuan Teknik Mesin, vol. 11, no. 1, pp. 12–20, 2025.
J. T. M. F. T. I. U. I. Indonesia, "Pengaruh cetakan metode spin casting terhadap kualitas produk," Jurnal Rekayasa Proses, vol. 15, no. 2, pp. 45–52, 2021.
M. Government, "Covariance structure analysis of health-related indicators in home-dwelling elderly focusing on subjective health perception," Journal of Global Dimensions in Culture, vol. 12, no. 1, pp. 3–41, 1997.
Tahir, E. R. Padang, H. Harjuma, and F. Firdaus, "Prototype perkakas mekanik berbasis benda kerja praktik mahasiswa," INSOLOGI: Jurnal Sains dan Teknologi, vol. 2, no. 1, pp. 210–220, 2023.
Indanah, A. Fitriani, and S. Rahayu, "Peningkatan kinerja mesin press baglog jamur tiram melalui modifikasi sistem kontrol tekanan silinder menggunakan magnet clutch performance," Jurnal Abdimas Indonesia, vol. 5, no. 1, pp. 114–120, 2024.
G. K. K. Ishara, P. A. Koliyabandara, and G. Samarakoon, "Eco-friendly bio-composite sheets: A study on the utilization of banana peels, cassava starch, and banana stem fibers," Frontiers in Sustainability, vol. 5, art. no. 1410986, 2024. doi: 10.3389/frsus.2024.1410986.
R. K. Sharma and P. Kumar, "Implementation of total productive maintenance approach improving overall equipment efficiency of a metal industry," Inventions, vol. 7, no. 4, art. no. 119, 2022. doi: 10.3390/inventions7040119.
W. Wikusna, Mustafid, and F. Jie, "Performance measurement in a custom production process model using the process mining approach: A systematic literature review," IEEE Access, vol. 12, pp. 173552–173556, 2024. doi: 10.1109/ACCESS.2024.3498433.
F. Pulansari, D. Tirkaamiana, A. D. Lestari, F. Kurniasari, I. P. Susanto, and F. Jie, "Holistic strategy for sustainable supply chains: Integrating the purchasing portfolio matrix, supplier relationship management, and life cycle assessment," Journal of Project Management, vol. 9, no. 1, pp. 1–12, 2024. doi: 10.5267/j.jpm.2024.12.001.
Susanty, N. B. Puspitasari, O. S. Anindyanari, and F. Jie, "Profiling the readiness and barriers toward digital technology adoption among the SMEs," Journal of Project Management, vol. 9, no. 2, pp. 85–96, 2024. doi: 10.5267/j.jpm.2024.7.003.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Rizki Dinansyah, Mukhammad Rizki Munir
This work is licensed under a Creative Commons Attribution 4.0 International License.
