Periodic Maintenance of Drum Pulper Machines at PT. XYZ

Pemeliharaan Berkala Mesin Drum Pulper di PT. XYZ

Authors

  • muhammad luqman hakim nur rohmat luqman Mahasiswa
  • Iswanto

DOI:

https://doi.org/10.21070/pels.v10i1.3036

Keywords:

Periodic maintenance, Drum pulper, Machine maintenance, Downtime, Production efficiency

Abstract

General Background The pulp and paper manufacturing industry relies heavily on the continuous reliability and operational efficiency of primary production machinery. Specific Background Periodic maintenance of the drum pulper machine at PT. XYZ is essential to sustain optimal performance under continuous, heavy-duty operational workloads. Knowledge Gap Unscheduled breakdowns and component wear can severely disrupt continuous pulping operations if structured preventive maintenance protocols are omitted. Aims This study examines the implementation of periodic maintenance on the drum pulper machine to prevent unexpected failures, minimize downtime, and extend equipment service life. Results Systematic maintenance encompassing routine inspections, lubrication schedules, and corrective component replacements successfully stabilizes machinery operations, curtails failure frequencies, and improves pulp consistency. Novelty This work presents an operational evaluation of structured daily, periodic, and corrective maintenance frameworks applied specifically to industrial drum pulper systems. Implications Effective and well-planned periodic maintenance systems are vital to support sustainable, optimal machinery operations and long-term production efficiency.

KEY FINDINGS HIGHLIGHTS

  1. Routine daily checks and cleaning procedures effectively detect operational anomalies at an early stage.

  2. Scheduled periodic maintenance protocols stabilize machine performance and reduce unplanned downtime.

  3. Corrective maintenance actions successfully restore normal machine operations following component wear or failure.

KEYWORDS

Periodic maintenance, Drum pulper, Machine maintenance, Downtime, Production efficiency

Downloads

Download data is not yet available.

References

A. Z. Saputra and A. S. Fauzi, "Pengolahan Sampah Kertas Menjadi Bahan Baku Industri Kertas Bisa Mengurangi Sampah di Indonesia," J. Mesin Nusant., vol. 5, no. 1, pp. 41–52, 2022, doi: 10.29407/jmn.v5i1.17522.

A. M. S. Ahlaq, D. Cahyadi, and F. S. Handika, "Analisa Perawatan Mesin Pulper Menggunakan Metode Overall Equipment Effectiveness (OEE)," J. INTECH Tek. Ind. Univ. Serang Raya, vol. 3, no. 2, p. 59, 2017, doi: 10.30656/intech.v3i2.878.

H. Santoso and D. T. Wibowo, "The Effectiveness of Preventive Maintenance in Overcoming Production Process Constraints on the Komori Lithrone G37 Offset Machine at PT X," Kreator, vol. 12, no. 1, pp. 17–25, 2025, doi: 10.46961/kreator.v12i1.1627.

H. S. I. Kulsum and F. E., "Usulan Waktu Preventive Maintenance untuk Menurunkan Downtime Mesin Paper Mill 1 dengan Reliability Block Diagram (Studi Kasus: PT Indah Kiat Pulp and Paper)," in Pros. Semnastek, pp. 1–8, 2018.

D. Aribowo et al., "Sistem Pengukuran Volume Cairan Pada Tangki Pembuburan Kertas (Study Kasus di PT Indah Kiat Pulp And Paper)," J. Sustainable: J. Hasil Penelit. dan Ind. Ter., vol. 9, no. 2, pp. 67–74, 2020.

A. B. Wijoyo and I. Iswanto, "Evaluation of Material Selection in Large-Capacity Manual Paper Cutters for the Optimization of Local Product Design of Blade and Frame Components," 2024. [Online]. Available: https://archive.umsida.ac.id/index.php/archive/preprint/view/8754

F. Y. U. M. U. Mukasafah, "Analisis Perawatan pada Mesin Hydropulper 31L008 (Cigarette Paper Manufacturer) Menggunakan Perawatan Pencegahan dalam Proses Pelumasan Bearing," vol. 13, no. 1, pp. 23–29, 2017.

N. K. Naik, R. M. Mathur, B. P. Thapliyal, A. K. Goel, and T. K. Roy, "Preventive Maintenance Practices in Pulp & Paper Mills," 2007.

J. Teknik, M. Fakultas, and T. Universitas, "Perancangan Sistem Informasi Perawatan Mesin Pada PT XYZ," vol. 6, no. 1, pp. 9–20, 2017.

F. Y. Utama, "Perencanaan Preventive Maintenance Schedule Permesinan Turning Di Bengkel SMK X Surabaya Dengan Sheet From Terstruktur," vol. 3, no. 2, pp. 76–85, 2021.

I. J. Informatika et al., "Analisis TPM Pada Mesin Milling Menggunakan Metode OEE," vol. 28, pp. 155–162, Apr. 2026, doi: 10.23969/infomatek.v28i1.45283.

C. Siregar, P. Kindangen, and I. D. Palandeng, "Evaluasi Pemeliharaan Mesin dan Peralatan Produksi PT. Multi Nabati Sulawesi (MNS) Kota Bitung," J. EMBA, vol. 10, no. 3, pp. 428–435, 2022.

O. Massa, "Oliver Massa," 2020.

E. Zebua and N. N. Manik, "Armatur," vol. 5, Mar. 2024.

D. Dermawan and A. Roicandra, "Implementasi Perawatan Mesin," vol. 3, no. 1, pp. 10–15, 2020.

U. M. Buana, U. Indo, and G. Mandiri, "Root Cause Analysis Implementation to Improve Tissue Mill Automation System Availability in a Mill of the Biggest Indonesia Pulp Paper Industry," Energy Technology Journal, vol. 9, no. 6, pp. 4314–4320, 2024, doi: 10.47191/etj/v9i06.20.

B. S. Heryanto, "Perawatan Preventif Mesin Bubut Menggunakan Metode Analisis Getaran Dalam Berbagai Kondisi Kecepatan Spindle," Otopro, vol. 15, no. 2, pp. 40–44, 2020, doi: 10.26740/otopro.v15n2.p40-.

A. Firdaus, "Perencanaan Perawatan Preventive dan Corrective pada Komponen Sistem Hidrolik Excavator," vol. 1, no. 1, 2017.

Downloads

Published

2026-10-12

How to Cite

[1]
muhammad luqman hakim nur rohmat luqman and I. Iswanto, “Periodic Maintenance of Drum Pulper Machines at PT. XYZ : Pemeliharaan Berkala Mesin Drum Pulper di PT. XYZ ”, PELS, vol. 10, no. 1, pp. 305–313, Oct. 2026.

Issue

Vol. 10 No. 1 (2026): Proceedings of the 9th Seminar Nasional Sains 2026

Section

Mechanical Engineering

Categories

License

Copyright (c) 2026 muhammad luqman hakim nur rohmat luqman, Iswanto

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.