A study of the properties of an epoxy cotton compound after adding silica atoms in different proportions
DOI:
https://doi.org/10.21070/pels.v8i2.3019Keywords:
Cotton Epoxy Composite, Nanosilica, tensile strength, Compressive Strength, ToughnessAbstract
General Background: Natural fiber-reinforced polymer composites have attracted significant attention as lightweight, corrosion-resistant, and environmentally friendly materials for structural and industrial applications. Specific Background: Epoxy resin reinforced with woven cotton fabric offers a sustainable composite system, while nanosilica is widely used to modify matrix properties and improve mechanical performance. Knowledge Gap: However, the optimal nanosilica content for balancing tensile strength, compressive behavior, and toughness in cotton/epoxy composites remains unclear. Aims: This study investigated the mechanical properties of woven cotton fabric-reinforced epoxy composites containing 0.5, 1, and 5 wt.% nanosilica. Results: Composite laminates were fabricated by hand lay-up using six cotton layers and tested according to ASTM standards. The tensile results showed that 0.5 wt.% nanosilica provided the highest tensile strength, with a maximum increase of 21.26%. Compressive testing indicated that 1 wt.% nanosilica exhibited superior load-bearing capacity, while toughness analysis showed the highest value for 0.5 wt.% nanosilica at 28,753.17 J/m³. In contrast, 5 wt.% nanosilica resulted in lower performance, likely due to particle agglomeration and non-uniform dispersion. Novelty: This study demonstrates that the optimal nanosilica loading depends on the specific mechanical property evaluated rather than a single universal filler concentration. Implications: The findings support the design of cotton/epoxy nanocomposites for sustainable engineering applications requiring tailored tensile, compressive, and energy absorption properties.
Highlights:
• 0.5 wt.% nanosilica produced the highest tensile strength and toughness in the composite laminates.
• 1 wt.% nanosilica provided the greatest compressive load-bearing capacity.
• 5 wt.% nanosilica reduced performance due to agglomeration and non-uniform particle distribution.
Keywords: Cotton Epoxy Composite, Nanosilica, Tensile Strength, Compressive Strength, Toughness
Downloads
References
Borassus Flabellifer (Asian Palmyra) fiber reinforced composite," Composites Part B: Engineering, vol. 55, pp. 479-485, 2013.
A. Haque, M. Shamsuzzoha, F. Hussain, D. Dean, S2-Glass/Epoxy polymer nanocomposites: manufacturing, structures, thermal and mechanical properties, Journal of Composite Materials, Vol. 37, pp. 1821-1837, 2003.
Ahmed Sahib Mahdi, Najah Rustum Mohsin " Water absorption and fatigue life of an Epoxy composite reinforced by glass fiber" International Conference on Materials Engineering and Science, 454, 2018
A. Mirzapour, M. H. Asadollahi, S. Baghshaei, M. Akbari, Effect of nanosilica on the microstructure, thermal properties and bending strength of nanosilica modified carbon fiber/phenolic nanocomposite, Composites Part A: Applied Science and Manufacturing, Vol. 63, pp. 159-167, 2014.
A. R. Beaber et al., "Nanostructured Sic by chemical vapor deposition and nanoparticle impaction," Surface & Coatings Technology, Vol. 202, pp. 871-875, 2007.
AL F Gorjani, G. M. S. Student, and A. Omidvar, "Investigation on Manufacturing Process and Mechanical Properties Wheat Straw/Recycled Polyethylene Composite," Pajouhesh and Sazandegi, 2007.
B. Yousif, A. Shalwan, C. Chin, and K. Ming, "Flexural properties of treated and untreated kenaf epoxy composites," Materials & Design, vol. 40, pp. 378-385, 2012.
C. Chen, R. S. Justice, D. W. Schaefer, J. W. Baur, highly dispersed nanosilica-epoxy resins with enhanced mechanical properties, Polymer, Vol. 49, pp. 3805-3815, 2008.
C. M. Thompson, H. M. Herring, T. S. Gates, and J. W. Connell, "Preparation and characterization of metal oxide/polyimide nanocomposites," Composites Science and Technology, Vol. 63, No. 11, pp. 1591-1598, 2003.
C. Scaiponi, "Hemp fiber composites for the design of a Naca cowling for ultra-light aviation," Composites Part B: Engineering, vol. 81, pp. 53-63, 2015.
C. Toumey, "Why not zwergo-technology?" Nature Nanotechnology, Vol. 6, p. 393, 07/06/online 2011.
D. Kim, S. Jeong, and J. Moon, "Synthesis of silver nanoparticles using the polyol process and the influence of precursor injection," Nanotechnology, Vol. 17, No. 16, p. 4019, 2006.
D. N. Bikiaris, A. Vassiliou, E. Pavlidou, and G. P. Karayannidis, "Compatibilisation effect of PP-g-MA copolymer on iPP/SiO2 nanocomposites prepared by melt mixing," European Polymer Journal, Vol. 41, No. 9, pp. 1965-1978, 2005.
KOLAHDOZAN, HAMIDEH. Seyed Saeed Nuri Khorasani, Seyed Mansur Bidaki. Sedigheh Vaezifar. 2008. Preparation and Determination of Properties of Nano-Silica Prepared by Sedimentation Method. Paint Industries Research Institute
Mohseni Shakib, Mohsen. 2010. Mechanics of Composite Structures. Tehran: Imam Hossein University. Institute of Printing and Publishing.
Motahari, Siamak, Abbas Naderi. 2003 Reinforcement of Composites Used in Marine Structures. 5th National Conference on Marine Industries of Iran
Masoumi, Bakhshali, Ali Akbar Entezami, 2010. Basics of Polymer Chemistry. Tehran: Payame Noor University
N. Samadi, "Dynamic Analysis of Targeted Beam Reinforced with Carbon Nanotubes." Msc Thesis, Razi University, 2011.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2026 Munadhil Kadhim Alomairy
This work is licensed under a Creative Commons Attribution 4.0 International License.
