Analysis of the Implementation of Critical Control Points (CCP) in the Original Mayonnaise Production Process at PT Bumbu Masak Indonesia
Analisis Penerapan Critical Control Point (CCP) pada Proses Produksi Mayonnaise Original di PT Bumbu Masak Indonesia
DOI:
https://doi.org/10.21070/pels.v10i1.2980Keywords:
Mayonnaise Production, Critical Control Point, Food Safety Management, Emulsion Stability, Physical Hazard ControlAbstract
General Background Implementing stringent food safety management systems in industrial processing operations is essential to guarantee final product quality and protect consumer health. Specific Background Mayonnaise manufacturing requires rigorous control measures during formulation and packaging due to susceptibility to microbial instability and physical contamination. Knowledge Gap Although Hazard Analysis and Critical Control Point frameworks are widely adopted across food processing sectors, empirical evaluations mapping specific operational critical points in commercial mayonnaise lines under ISO 22000:2018 standards remain limited. Aims This study evaluates the application of Critical Control Points in the original mayonnaise production line at PT Bumbu Masak Indonesia to identify critical boundaries and corrective protocols. Results Operational workflow analysis confirms full system alignment with ISO 22000:2018 standards, identifying two primary Critical Control Points: premix pH regulation during final mixing (CCP 1) and post-packaging electromagnetic metal detection paired with automated rejection (CCP 2). Novelty Systematic mapping demonstrates that maintaining a strict pH threshold below 4.0 prevents pathogenic microbial proliferation and emulsion breakdown while final metal screening eliminates physical hazards. Implications Adhering to these established critical limits ensures consistent product stability, shelf-life integrity, and compliance with industrial food safety standards.
Key Findings Highlights
ISO 22000 Standardized System Identifies Two Primary Critical Points
Premix pH Maintenance Below Threshold Guarantees Emulsion Stability
Metal Detection System Eliminates Physical Contamination In Final Packaging
Keywords Mayonnaise Production, Critical Control Point, Food Safety Management, Emulsion Stability, Physical Hazard Control
Downloads
References
R. Widodo, W. K. D. Cahyani, T. Y. W. Wibowo, and A. Wulandari, "Application of Hazard Analysis and Critical Control Points (HACCP) on the production process line of noni juice drink (Morinda citrifolia L.)," Food Science and Technology Journal, pp. 69–80, 2022.
S. D. Mulyawati, "Scoping review: Manfaat penerapan Hazard Analysis and Critical Control Points (HACCP) dalam meningkatkan keamanan dan mutu produk makanan," Jurnal Occupational Health, Hygiene and Safety, vol. 2, no. 2, pp. 250–264, 2024.
S. Santi, M. G. Wadhana, and N. F. Rachmawati, "Penerapan proses pembekuan seafood dengan konsep HACCP PT Istana Cipta Sembada (ICS)," Jurnal Lemuru, vol. 4, no. 1, pp. 14–23, 2022.
H. Evanuarini, Nurliyani, Indratiningsih, and P. Hastuti, "Fat mayonnaise dengan menggunakan kefir sebagai emulsifier replacer," Jurnal Ilmu dan Teknologi Hasil Ternak, vol. 11, no. 2, pp. 53–59, 2016.
Priastuti, A. Sutiadiningsih, and A. Bahar, "Penyelenggaraan operasional penerimaan, penyimpanan, dan pendistribusian bahan baku poultry, fish, seafood di PT. XYZ," Jurnal Creative Student Research, vol. 2, no. 4, pp. 126–145, 2024.
S. Salsabila and D. F. Rosida, "Identifikasi titik kendali kritis pada proses pengolahan teh kolagen CV. Raissa Beauty," Jurnal Abdimesin, vol. 3, no. 1, pp. 23–28, 2023.
W. Murti, "Validasi metal detector dalam rangka pengendalian Critical Control Point pada produk cokelat butir di PT XYZ," Skripsi, Institut Teknologi Indonesia, Serpong, Indonesia, 2022.
R. R. Putraisya and J. Triastuti, "Determination and application of Critical Control Points on ebi fry production (value added product) at PT. Jala Sembilan Semarang, Central Java," Journal of Marine and Coastal Technology, vol. 1, no. 2, pp. 40–48, 2022.
M. M. A. K. Munsur, M. S. Rahman, and M. A. R. Mazumder, "Implementation of Hazard Analysis and Critical Control Point (HACCP) system in mayonnaise manufacturing plant," International Journal of Food Safety and Quality Management, vol. 12, no. 3, pp. 115–124, 2024, doi: 10.1016/j.ijfsqm.2024.100341.
E. D. T. Bouillet, C. C. T. Silva, and R. A. M. V. Santos, "Microbiological safety and physical stability of emulsified sauces under ISO 22000 management standards," Food Control, vol. 158, art. no. 110214, 2024, doi: 10.1016/j.foodcont.2023.110214.
J. H. Choi, S. Y. Lee, and K. H. Park, "Verification and critical limit determination of metal detection systems in automated sauce packaging lines," Journal of Food Protection, vol. 88, no. 2, art. no. 100412, 2025, doi: 10.1016/j.jfp.2024.100412.
R. C. Gomez, L. M. Fernandez, and P. A. Rodriguez, "pH regulation as a primary critical control point for microbial inhibition in oil-in-water emulsions," LWT - Food Science and Technology, vol. 201, art. no. 116235, 2024, doi: 10.1016/j.lwt.2024.116235.
L. Smith, M. J. Davies, and H. T. Taylor, "Evaluation of prerequisite programs and HACCP implementation in medium-scale condiment manufacturing," Food Quality and Safety, vol. 9, art. no. fyae015, 2025, doi: 10.1093/fqsafe/fyae015.
K. V. H. Nguyen, T. N. P. Le, and D. M. Tran, "Integration of ISO 22000:2018 and HACCP principles for hazard mitigation in commercial emulsion processing," Trends in Food Science & Technology, vol. 146, art. no. 104410, 2024, doi: 10.1016/j.tifs.2024.104410.
S. B. Patel and R. N. Mehta, "Optimization of inline quality control parameters and metal rejection systems in commercial food packaging," Packaging Technology and Science, vol. 38, no. 1, pp. 45–56, 2025, doi: 10.1002/pts.2789.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Lailis Sabilah, Al Machfud WDP
This work is licensed under a Creative Commons Attribution 4.0 International License.
