Iron Rod Shawing Process For General Industry Suppliers
Proses Sekrap Batang Besi Untuk Supplier General Industri
DOI:
https://doi.org/10.21070/tj749g09Keywords:
Iron rod shaping, Shaping machine, Vertical milling, Industrial machining, Manufacturing supply chainAbstract
General Background: Modern manufacturing industries rely heavily on traditional machining techniques to process metal components efficiently. Specific Background: Iron rod shaping via mechanical shaping tools is a fundamental procedure required to produce flat, smooth surfaces for general industrial suppliers. Knowledge Gap: Existing industrial internship reports frequently lack detailed operational parameters, structured workflow documentation, and comprehensive machine setup analyses for metal shaping. Aims: This study aims to examine and document the iron rod shaping and machining procedures performed during an industrial internship at PT X. Results: The operational workflow successfully integrated material cutting, welding, shaping, vertical milling, and packaging, achieving high dimensional precision and surface smoothness. Novelty: This work provides an exhaustive practical breakdown of sequential conventional machining operations combined with packaging logistics tailored for industrial supply chains. Implications: Implementing these standardized machining procedures optimizes production output, reduces workpiece defects, and secures reliable metal material delivery for manufacturing partners.
Key Findings Highlights
-
Documenting the complete sequential workflow of iron rod preparation, cutting, welding, and shaping at PT X,
-
Demonstrating precise parameter configuration for shaping and vertical milling machines to achieve superior surface quality,
-
Establishing standardized finishing and packaging protocols to fulfill rigorous general industrial supplier requirements,
Keywords Iron rod shaping, Shaping machine, Vertical milling, Industrial machining, Manufacturing supply chain
References
E. E. Journal, "EISSN: Volume 4, Issue 2, November 2024," E. E. Journal, vol. 4, no. 2, pp. 85-97, 2024.
C. Jatira, C. Anwar, and I. Khumaidillah, "Analisis Kerusakan Eretan Meja Pada Mesin Sekrap Tipe Kloop Model 525," Jurnal Teknologi, vol. 13, no. 2, pp. 317-327, 2023.
Yanto, H. Fahmi, and Y. Darman, "Pengaruh Sudut Awal Pemotongan dan Kedalaman Potong pada Proses Sekrap Terhadap Keausan Tepi Pahat HSS," Jurnal Teknik Mesin, vol. 10, no. 2, pp. 45-52, 2020.
Anggi, J. Jasman, P. Purwantono, and E. Indrawan, "Perbaikan dan Perawatan Mesin Sekrap Onak Type L-350 di Laboratorium Pemesinan FT-UNP," Jurnal Vokasi Mekanika, vol. 3, no. 2, pp. 54-63, 2021, doi: 10.24036/vomek.v3i2.200.
Setiawan, "Pembuatan Mesin Traktor Tangan Kerangka Pipa dengan Gasoline Engine 5.5 HP," Jurnal Teknik Mesin, vol. 7, no. 1, pp. 1-12, 2021.
L. W. Putra, A. Hidayat, M. Fachrul, and M. I. Kido, "Pengembangan Mesin Tool Grinding Endmill," Jurnal Tematis (Teknologi, Manufaktur, dan Industri), vol. 3, no. 1, pp. 14-28, 2022.
M. Yanis, Z. Abidin, and Q. Hadi, "Peningkatan Kinerja Mesin Sekrap Pengerjaan Proses Freis dan Proses Gerinda," in Proceeding Seminar Nasional Tahunan Teknik Mesin XII (SNTTM XII), pp. 23-24, 2013.
Sriyanto, E. Iryanto, and Suhartoyo, "Pengaruh Sudut Bebas Pahat Terhadap Kekasaran Permukaan," Koloni: Jurnal Multidisiplin Ilmu, vol. 1, no. 1, p. 133, 2022, doi: 10.55123/koloni.v1i1.17.
Tahir, E. R. Padang, H. Harjuma, and F. Firdaus, "Prototype Perkakas Mekanik Berbasis Benda Kerja Praktik Mahasiswa," Insoligi: Jurnal Sains dan Teknologi, vol. 2, no. 1, pp. 210-220, 2023, doi: 10.1055123/insologi.v2i1.1655.
M. Firmansyah, D. A. R. Wati, R. E. Pramitasari, and N. P. Wijanarko, "Pengaruh Variasi Kecepatan Putaran Spindle Frais Milling Terhadap Sifat Kekasaran Alumunium 6061," Jurnal Penelitian Multidisiplin Bangsa, vol. 2, no. 4, pp. 766-772, 2025, doi: 10.59837/jpnmb.v2i4.552.
S. Kalpakjian and S. R. Schmid, Manufacturing Engineering and Technology, 7th ed. Pearson, 2014.
M. P. Groover, Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, 6th ed. Wiley, 2016.
D. A. Stephenson and J. S. Agapiou, Metal Cutting Theory and Practice, 3rd ed. CRC Press, 2016.
J. P. Davim, Machining Fundamentals and Recent Advances. Springer, 2008.
F. Klocke, Manufacturing Processes 1: Cutting. Springer, 2011.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Muhammad Afif Nahrowi, Prantasi Harmi Tjahjanti

This work is licensed under a Creative Commons Attribution 4.0 International License.
