Theoretical Study of the Steady Time of Thermal Transmission in Materials That Have Engineering Uses


Studi Teoritis tentang Waktu Tenang Transmisi Termal pada Material yang Memiliki Kegunaan Teknik


  • (1) * Raghad Hikmet AlAttar            Middle Technical University, Technical Engineering College-Baghdad, Baghdad, Iraq  
            Iraq

  • (2)  Asim S. Allawy            Middle Technical University, Technical Engineering College-Baghdad, Baghdad, Iraq  
            Iraq

  • (3)  Hassan. J Dakkama            Middle Technical University, Technical Engineering College-Baghdad, Baghdad, Iraq  
            Iraq

    (*) Corresponding Author

Abstract

General Background: Understanding the time required to achieve steady-state heat transfer in construction materials is crucial for various engineering applications, including construction, architecture, and electronics. Specific Background: This study investigates the steady time of thermal transmission in engineering materials using both theoretical and experimental approaches. Knowledge Gap: Despite existing research on heat transfer, there is a lack of comprehensive studies that integrate both simulation and experimental validation for a wide range of building materials.Aims: The primary aim is to evaluate the steady-state time of heat transfer in fifteen construction materials through theoretical models and simulations using MATLAB and ANSYS, and to experimentally validate these findings with four selected materials. Results: The study finds that the steady time for heat transfer varies significantly among materials, with wood packaging requiring the longest time (32.49 hours) and aluminum the shortest (0.49 hours). Theoretical results, validated by simulations, show close agreement between MATLAB and ANSYS (0.087% deviation) and between numerical and experimental results (9.5% deviation). Brick demonstrated a 61.18% longer heat transfer time compared to concrete, while thermostone showed a 17.45% and 89.31% increase over brick and concrete, respectively. Novelty: This research provides new insights into the comparative stability of heat transfer times across a broad spectrum of materials, highlighting significant performance variations and validating simulation methods against experimental data. Implications: These findings are vital for optimizing material selection in construction to enhance thermal efficiency. The study’s methodologies can aid in developing more accurate predictive models for heat transfer in construction materials, thereby contributing to improved design and energy performance in building applications.

Downloads

Download data is not yet available.

References

. "With the Global Heat Wave, Is Air Conditioning the Best Solution?" GreenFue, [Online]. Available: https://greenfue.com/%D9%85%D8%B9-%D9%85%D9%88%D8%AC%D8%A9-%D8%A7%D9%84%D8%AD%D8%B1-%D8%A7%D9%84%D8%B9%D8%A7%D9%84%D9%85%D9%8A%D8%A9-%D9%87%D9%84-%D8%AC%D9%87%D8%A7%D8%B2-%D8%A7%D9%84%D8%AA%D9%83%D9%8A%D9%81-%D9%84/. [Accessed: Sep. 2, 2024].

. "Learn About One of the Biggest Challenges in Energy Consumption," Al Arabiya, Jan. 13, 2021. [Online]. Available: https://www.alarabiya.net/qafilah/2021/01/13/%D8%AA%D8%B9%D8%B1%D9%81-%D8%B9%D9%84%D9%89-%D9%88%D8%A7%D8%AD%D8%AF-%D9%85%D9%86-%D8%A3%D9%83%D8%A8%D8%B1-%D8%A7%D9%84%D8%AA%D8%AD%D8%AF%D9%8A%D8%A7%D8%AA-%D9%84%D8%AA%D9%88%D9%81%D9%8A%D8%B1-%D8%A7%D8%B3%D8%AA%D9%87%D9%84%D8%A7%D9%83-%D8%A7%D9%84%D8%B7%D8%A7%D9%82%D8%A9. [Accessed: Sep. 2, 2024].

. "Article on Thermal Conductivity of Materials," Al Qabas, 2020. [Online]. Available: https://www.alqabas.com/article/5800322. [Accessed: Sep. 2, 2024].

. J. Soto, I. Perez, and J. V. Ros-Lis, "A New Model Based on Experimental Results for the Thermal Characterization of Bricks," Building and Environment, vol. 44, pp. 1047–1052, 2009, doi: 10.1016/j.buildenv.2008.07.016. DOI: https://doi.org/10.1016/j.buildenv.2008.07.016

. A. McNabb and G. C. Wake, "Heat Conduction and Finite Measures for Transition Times Between Steady States," IMA Journal of Applied Mathematics, vol. 47, no. 2, pp. 193–206, 1991, doi: 10.1093/imamat/47.2.193. DOI: https://doi.org/10.1093/imamat/47.2.193

. N. M. L. P. Thomas and B. M. Marino, "Steady-State and Time-Dependent Heat Fluxes Through Building Envelope Walls: A Quantitative Analysis to Determine Their Relative Significance All Year Round," Journal of Building Performance, vol. 10, no. 3, pp. 1–15, 2019, doi: 10.1016/j.jobe.2019.101122. DOI: https://doi.org/10.1016/j.jobe.2019.101122

. P. Muñoz, M. C. Juárez, M. P. Morales, and M. A. Mendívil, "Improving the Thermal Transmittance of Single-Brick Walls Built of Clay Bricks Lightened with Paper Pulp," Energy and Buildings, vol. 59, pp. 171–180, 2013, doi: 10.1016/j.enbuild.2012.12.022. DOI: https://doi.org/10.1016/j.enbuild.2012.12.022

. U. Hammerschmidt, "Guarded Hot-Plate (GHP) Method," International Journal of Thermophysics, vol. 23, no. 6, pp. 1551–1570, 2002, doi: 10.1023/A:1020737900473. DOI: https://doi.org/10.1023/A:1020737900473

Picture in here are illustration from public domain image (License) or provided by the author, as part of their works
Published
2024-09-02
 
How to Cite
[1]
R. H. AlAttar, A. S. Allawy, and H. J. Dakkama, “Theoretical Study of the Steady Time of Thermal Transmission in Materials That Have Engineering Uses”, PELS, vol. 7, pp. 771-779, Sep. 2024.