Maintenance and Handling of Dryer Machines at PT.XYZ
Perawatan dan Penanganan Mesin Dryer di PT. XYZ
DOI:
https://doi.org/10.21070/pels.v10i1.1640Keywords:
Paper Production, Dryer Equipment, Preventive Maintenance, Mechanical Degradation, Operational EfficiencyAbstract
General Background The paper production industry relies heavily on sequential processing stages, where the drying phase is vital for achieving desired moisture levels, material ductility, and surface quality. Specific Background Dryer operations utilize heating systems and rotating drums to evaporate moisture from newly produced materials, requiring consistent temperature and ventilation control. Knowledge Gap Despite their critical role, these systems frequently experience operational disruptions due to unaddressed minor faults, which can lead to severe mechanical failures and suboptimal production if not properly managed. Aims This study investigates the common causes of equipment degradation and formulates systematic handling procedures to minimize operational downtime. Results Utilizing qualitative observation and interview methods over a 30-day period at a manufacturing facility, the research identifies five primary causes of physical damage: overheating, component wear, corrosion, transmission belt failure, and bearing degradation. Furthermore, the study delineates seven essential handling protocols, including scheduled inspections, precise lubrication, regular cleaning, timely component replacement, heating system monitoring, accurate temperature calibration, and comprehensive operator training. Novelty This research provides a structured, site-specific fault identification and handling framework tailored directly to industrial paper manufacturing operations. Implications Executing these targeted, scheduled handling protocols secures continuous production flow, preserves high material quality, and significantly reduces the risk of mechanical breakdowns.
Highlights:
-
Qualitative observation at a manufacturing facility revealed overheating, corrosion, wear, and bearing degradation as primary operational disruptions.
-
Implementing scheduled inspections, cleaning, lubrication, and system calibration mitigates equipment failures.
-
Comprehensive operator training combined with routine component replacement secures continuous production flow and consistent material quality.
Keywords: Paper Production, Dryer Equipment, Preventive Maintenance, Mechanical Degradation, Operational Efficiency
Downloads
References
M. Zainuddin, “Pengelolahan Sumber Daya Manusia di PT. Mega Surya Eratama Mojokerto,” 2021. [Online]. Available: http://repository.stiedewantara.ac.id/1641/1/LAPORAN KKM_BENER.pdf
N. Mubarakah, R. W. Arsianti, and Mulyadi, “Performance of subcarrier and power allocation orthogonal frequency-division multiplexing on millimeter wave,” Telkomnika, vol. 11, no. 1, pp. 167–174, 2013, doi: 10.12928/telkomnika.v11i1.901.
A. Hadiansyah, “Menentukan Koefisien Perpindahan Panas Total (U) dan Heat Loss Setiap Section Main Dryer Unit,” Politek. Negeri Bandung, vol. 1, no. 69, pp. 5–24, 2019.
M. Rizky and F. Dermawan, “Analysis of the Causes of Crooked Cane Carrier Shafts at the Kremboong Sugar Factory: Analisa Penyebab Poros Krepyak Tebu Terjadi Bengkok di Pabrik Gula Kremboong,” vol. 7, pp. 335–338, 2024.
R. B. Jakaria, Iswanto, N. Binti M. Y. Ariffin, and M. Bin Ibrahim, “Analytic Hierarchy Process (AHP) Method for Measuring the Dominance of Product Design Against Industry Criteria 4.0,” Proc. 2nd Int. Conf. Bus. Manag. Technol. (ICONBMT 2020), vol. 175, pp. 195–201, 2021, doi: 10.2991/aebmr.k.210510.033.
I. Ramadhan, W. Widiasih, P. Studi, T. Industri, and M. Pumpungan, “Analisis Penggantian dan Perawatan pada Papermachine Bagian Wire dan Dryer Menggunakan Metode Reliability Centered Maintenance dan Age Replacement pada PT. X,” vol. 6, no. 1, pp. 1–14, 2023, doi: 10.59432/jute.v6i1.60.
R. A. Pratama, Y. A. Fatimah, and T. A. Purnomo, “Minimasi Downtime Mesin Dryer dengan Reliability Centered Maintenance di PT Papertech Indonesia Unit II,” Borobudur Eng. Rev., vol. 1, no. 1, pp. 1–12, 2021, doi: 10.31603/benr.3166.
W. H. Yahya and M. Mulyadi, “Centrifugal Pump Maintenance at PT UG MANDIRI,” Procedia Eng. Life Sci., vol. 7, pp. 151–155, 2024, doi: 10.21070/pels.v7i0.1565.
H. H. Azwir, A. I. Wicaksono, and H. Oemar, “Manajemen Perawatan Menggunakan Metode RCM pada Mesin Produksi Kertas,” J. Optimasi Sist. Ind., vol. 19, no. 1, pp. 12–21, 2020, doi: 10.25077/josi.v19.n1.p12-21.2020.
M. H. Kurniawan and Khusnul Khotimah Ayuningtiyas, “Implementasi Reliability Centered Maintenance untuk Mengurangi Downtime Mesin pada Perusahaan Manufaktur Kertas dengan Metode Failure Mode and Effect Analysis,” J. Energy, Mater. Manuf. Technol., vol. 2, no. 2, pp. 15–24, 2023, doi: 10.61844/jemmtec.v2i02.462.
Yudianto, L. Parinduri, and B. Harahap, “Penerapan Metode Statistical Process Control dalam Mengendalikan Kualitas Kertas Bobbin (Studi Kasus: PT. Pusaka Prima Mandiri),” Bul. Utama Tek., vol. 14, no. 2, pp. 106–111, 2019.
E. Erwin, E. Zebua, and N. N. Manik, “Analisis Interval Waktu Perawatan Preventif pada Paper Machine dengan Metode Reliability Centered Maintenance (RCM),” ARMATUR: Artikel Teknik Mesin & Manufaktur, vol. 5, no. 1, 2024, doi: 10.24127/armatur.v5i1.5414.
A. S. Syukma, J. Jufrizel, A. Ullah, and D. Mursyitah, “Analisa Keandalan Instrumentasi pada Pulp Dryer Unit Menggunakan Metode Reliability Centered Maintenance (RCM) di PT. Indah Kiat Pulp and Paper Perawang,” J. Al-Azhar Indonesia Seri Sains dan Teknologi, vol. 9, no. 3, 2024, doi: 10.36722/sst.v9i3.2896.
G. Ranti, “Implementasi Lean Reliability Centered Maintenance (RCM) untuk Meningkatkan Keandalan Mesin: Studi Kasus PT Pelita Cengkareng Paper,” J. Ilmu Pengetahuan dan Teknologi, vol. 7, no. 2, 2023, doi: 10.31543/jii.v7i2.178.
P. J. Ginting and A. Soepardi, “Analisis Keandalan Mesin Produksi dengan Pendekatan Reliability Centered Maintenance (RCM) (Studi Kasus di PT. Nissin Biscuit Indonesia),” J. Ilm. Teknik Industri Prima, vol. 6, no. 2, 2023, doi: 10.34012/juritiprima.v6i2.3517.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Andik Abdul Jalil, Iswanto
This work is licensed under a Creative Commons Attribution 4.0 International License.
