Accu Scrap Raw Material Inventorycontrol Using the Min- Max Method
Pengendalian Persediaan Bahan Baku Scrap Accu Dengan Metode Min-Max
-
(1) * Muhammad Nur Faizin
Universitas Muhammadiyah Sidoarjo
Indonesia
(2) Ribangun Bamban Jakaria Universitas Muhammadiyah Sidoarjo
Indonesia
(*) Corresponding Author
Abstract
This research investigates the efficacy of implementing the Min-Max method to enhance inventory control performance in a manufacturing setting converting ACCU scrap into tin metal. Focused on two product types, bullion, and ingots, the study aims to optimize inventory policies by determining safety stock, minimum and maximum stock levels, order quantities, and reorder points to mitigate stockouts and overstocks. Results demonstrate a significant improvement, with the Min-Max method enabling a 33% increase in raw material control effectiveness compared to previous methods. This research underscores the potential for the Min-Max approach to provide practical solutions for inventory management challenges in manufacturing, offering valuable insights for industry practitioners and researchers alike.
Highlight :
- The Min-Max method improved inventory management effectiveness by 33%.
- This approach facilitated the determination of safe stock levels, minimal order quantities, and reorder points.
- Manufacturers experienced reduced operating expenses while maintaining competitive edge and responsiveness to market dynamics.
Keywords: Accu scrap processing, Min-Max method, inventory control, supply chain optimization, resource allocation
Downloads
References
M. J. Siregar, “Pengendalian Stok Spareparts Mobil Dengan Metode EOQ dan Min-Max Inventory,” Serambi Engineering, vol. VI, no. 3, 2021. DOI: https://doi.org/10.32672/jse.v6i3.3121
Wildan Agung Darmawan, “Menentukan Jumlah Persediaan Bahan Baku Aluminium pada IKM Bunga Matahari dengan Menggunakan Metode Economic Order Quantity (EOQ)”.
A. Bakhtiar and S. Audina, “Analisis Pengendalian Persediaan Aux Raw Material Menggunakan Metode Min-Max Stock di PT. Mitsubishi Chemical Indonesia,” 2021.
“Analisis Pengendalian Persediaan Pakan Udang dengan Metode Min-Max Stock pada CV. Ikhsan Jaya ”.
M. I. Humaidy, “Perancangan Sistem Stock Opname Bahan Baku Resep Bolu Menggunakan Metode Min-Max Stock,” 2022. [Online]. Available: https://ejurnal.seminar-id.com/index.php/jussi DOI: https://doi.org/10.47065/jussi.v1i3.2094
N. L. Rachmawati and M. Lentari, “Penerapan Metode Min-Max untuk Minimasi Stockout dan Overstock Persediaan Bahan Baku,” Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 8, no. 2, pp. 143–148, Oct. 2022, doi: 10.30656/intech.v8i2.4735. DOI: https://doi.org/10.30656/intech.v8i2.4735
J. Hasil, P. Dan, K. Ilmiah, J. D. Octaviani, and R. Fitriani, “Analisis Pengendalian Persediaan Bahan Baku Menggunakan Metode Min-Max Stock Pada PT.XYZ.”
“min max tak gawe”.
U. A. Kurnianto, S. T. Salmia, R. Septiari, ) Program, and S. T. Industri, “Perencanaan Bahan Baku Serta Optimasi Produk Menggunakan Metode Min-Max (Studi Kasus: Sambel Pecel Mbak Ti),” Jurnal Mahasiswa Teknik Industri), vol. 5, no. 2, 2022.
O. : Ronny and H. Hertanto, “Hertanto :Metode Min-Max dan Penerapanya ,
Hal :161-167 *) Ronny Hendra Hertanto adalah dosen Universitas Gajayana Malang Metode Min-Max dan Penerapannya sebagai Pengendali Persediaan Bahan Baku pada PT. Balatif Malang.”
Copyright (c) 2024 Muhammad Nur Faizin, Ribangun Bamban Jakaria
This work is licensed under a Creative Commons Attribution 4.0 International License.
