Identify Product Defects In The Injection Molding Process


Identifikasi Cacat Produk Pada Proses Injection Molding


  • (1) * Sulung Wibawansyah Sulung Wibawansyah              
            Indonesia

    (*) Corresponding Author

Abstract

Injection molding is a method of processing thermoplastic polymer seeds that are inserted into a hopper into
a barrel then the material is pushed by a screw to enter the mold (mold). However, products produced by injection
molding machines are sometimes still found defects in the product. Common defects include: Short shot, Flash, Sink
mark, Flow mark, Black spot, Warpage and Colour streaks. And the most causative factors are materials that do not
comply with production procedures, lack of checking on the control panel, mold design errors (mold).
Keywords - Injection molding; defects; mold

Downloads

Download data is not yet available.
Picture in here are illustration from public domain image (License) or provided by the author, as part of their works
Published
2024-03-13
 
How to Cite
[1]
S. W. Sulung Wibawansyah, “Identify Product Defects In The Injection Molding Process”, PELS, vol. 5, pp. 223 - 226, Mar. 2024.

DB Error: Unknown column 'Array' in 'where clause'