Analysis of Design For Assembly (Dfa) in Exhaust Product Design Analisa Design For Assembly (Dfa) Pada Perancangan Produk Knalpot

Article Sidebar

PDF
Published: Jul 28, 2021
DOI: https://doi.org/10.21070/pels.v1i2.1033
Keywords:
Product Design, Design For Assembly (DFA), Handling and Insertion Code.

Main Article Content

Hamzah Achmad Putra
Universitas Muhammadiyah Sidoarjo, Indonesia
Ribangun Bamban Jakaria
Universitas Muhammadiyah Sidoarjo, Indonesia

Abstract

GRIP Exhaust is a small and medium industry which is engaged in manufacturing which produces mufflers. The production system in this company is to apply a production system made to order, where consumers can order exhaust products according to their requests. Designing exhausts according to technical specifications by applying the Design For Assembly (DFA) method and calculating the time required to assemble custom exhaust products into technical specifications by producing products according to user needs. With Design For Assembly (DFA) to make it easier and push time, but still focus on the function of the product itself and pay attention to the safety factor of its performance. custom stainless steel exhaust takes 2 hours to complete, rust-resistant quality, an efficiency value of 1.23, and has higher advantages and attractiveness in the eyes of consumers.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
Hamzah Achmad Putra and Ribangun Bamban Jakaria, “Analysis of Design For Assembly (Dfa) in Exhaust Product Design”, PELS, vol. 1, no. 2, Jul. 2021.
Issue
Vol 1 No 2 (2021): Proceedings of the 2nd Seminar Nasional Sains 2021
Section
Industrial Engineering
Crossref
Scopus
Google Scholar
Europe PMC

References

[1] B. P. Pambudi, Lutfitona Ridho, “Knockoff Brand Sebagai Strategi Pemasaran Knalpot ‘Palsu’ Purbalingga,” J. Ris. Ekon. Manajemen, Bisnis dan Akunt., pp. 1–8, 2018.
[2] Syarifudin, “Pengaruh Penggunaan Knalpot Standart Dengan Racing Terhadap Konsumsi Bahan Bakar Sepeda Motor Mio Gt Soul,” J. Nozzle, vol. 5, no. 1, pp. 106–108, 2016.
[3] S. Pareza and R. Lapisa, “Build Design Of Electric Bike As Energy Efficient Transportation Rancang Bangun Sepeda Listrik Sebagai Transportasi Hemat Energi,” pp. 65–72.
[4] B. H. Tambunan, I. Koto, and I. Lubis, “Usaha Mengurangi Kebisingan Knalpot Produksi IKM di Kota Medan,” J. Din., vol. 2, no. 14, pp. 1–7, 2014.
[5] P. Merek, D. Dan, K. Produk, J. Manajemen, and F. Ekonomi, “Pengaruh Merek, Desain Dan Kualitas Produk Terhadap Keputusan Pembelian Iphone Studi Kasus Pada Mahasiswa Stie Eben Haezar Manado,” J. Berk. Ilm. Efisiensi, vol. 16, no. 4, pp. 367–375, 2016.
[6] N. S. Nana Umdiana and K. Suprihatin, “Pengembangan Bersaing,” Pengemb. Ukm Melalui Desain Prod. Dan Kemamp. Bersaing, pp. 169–176, 2018.
[7] N. Nazaruddin and U. Riau, “PENGEMBANGAN MESIN BAKSO DENGAN METODE DFMA ( DESIGN FOR MANUFACTURING AND ASSEMBLY ) PENGEMBANGAN MESIN BAKSO DENGAN METODE DFMA ( DESIGN FOR.”
[8] R. Ginting, Perancangan Produk. y: Graha Ilmu, 2010.
[9] R. M. Veranika, “APLIKASI DESIGN FOR ASSEMBLY ( DFA ) PADA PERANCANGAN PRODUK VACCINE CARRIER,” vol. 2, no. 2, pp. 165–172.
[10] J. E. Fuller, Menggunakan AUTOCAD. Jakarta: Erlangga, 1990.
[11] A. Irfan et al., “USULAN PERBAIKAN PERANCANGAN PRODUK SMART LIGHT MENGGUNAKAN METODE DESIGN FOR ASSEMBLY BOOTHROYD-DEWHURST,” no. 23.